R1/8" - 4mm Elbow 2-Way Ball Valve Series 10

Notice: This product is discontinued

Discontinued
R1/8" - 4mm Elbow 2-Way Ball Valve Series 10
Image may vary slightly
See specifications for accurate information.
Reference: BVLC01-4
Brand: Pisco

This is an elbow 2-way ball valve for open/close control of the air flow. It has a 1/8 inch r fitting on one side and an push-in 4 mm male threaded port on the other side. It is suitable for a maximum operating pressure of 7 bar (101.5 psi). Also suitable for vacuum applications at a pressure of -1 bar (-14.5 psi). It has PTFE seals that make it suitable for applications within a temperature range from 0 to 60 °C (32 to 140 °F). Use the quarter-turn handle to open or close the valve.

View all

Notice: This product is discontinued

Description
Specifications
Downloads

This is an elbow 2-way ball valve for open/close control of the air flow. It has a ball with a bore drilled through it which allows air flow when the bore is aligned with the ports.

It has a 1/8 inch r fitting on one side and an push-in 4 mm male threaded port on the other side.

It is suitable for a maximum operating pressure of 7 bar (101.5 psi. Also suitable for vacuum applications at a pressure of -1 bar (-14.5 psi). It has PTFE seals that make it suitable for applications within a temperature range from 0 to 60°C (32 to 140 °F) (no freezing).

Use a quarter-turn handle to open or close the valve. Make sure to turn it completely to avoid damaging the valve.

Pros:

  • Suitable for vacuum applications
  • Sealant coating provides a secured sealed connection with an actuator

Cons:

  • Dust could damage the pneumatic system if vacuum is applied without a filter on the inlet side

BVLC10 series

The 10 - series includes straight and elbow 2-way ball valves used for open/close control of the air flow. These valves can be equipped with push-in and threaded ports which can be selected in different combinations. The push-in fitting sizes range from 4 to 6 mm while the threaded port is R1/8 inch. The valves are suitable for a maximum operating pressure of 7 bar and a vacuum of -1 bar. They are suitable for temperature range from 0 to 60°C (no freezing) thanks to the NBR sealing. The housing is made of PBT while the threaded ports and the ball are made of nickel-plated brass.