Solenoid Valve HP-DA 1/4'' high pressure stainless steel PTFE 4-75bar 24V DC

Solenoid Valve HP-DA 1/4'' high pressure stainless steel PTFE 4-75bar 24V DC
Solenoid Valve HP-DA 1/4'' high pressure stainless steel PTFE 4-75bar 24V DC
Solenoid Valve HP-DA 1/4'' high pressure stainless steel PTFE 4-75bar 24V DC
Solenoid Valve HP-DA 1/4'' high pressure stainless steel PTFE 4-75bar 24V DC
Solenoid Valve HP-DA 1/4'' high pressure stainless steel PTFE 4-75bar 24V DC
Solenoid Valve HP-DA 1/4'' high pressure stainless steel PTFE 4-75bar 24V DC
Solenoid Valve HP-DA 1/4'' high pressure stainless steel PTFE 4-75bar 24V DC
Solenoid Valve HP-DA 1/4'' high pressure stainless steel PTFE 4-75bar 24V DC
Solenoid Valve HP-DA 1/4'' high pressure stainless steel PTFE 4-75bar 24V DC

Notice: This product will be discontinued in the future

Reference: HP-DA014S010P-024DC
Brand: JP Fluid Control

JP Fluid Control 2 way solenoid valve (type HP-DA) with G 1/4 inch threads and a 24 V DC coil. The circuit function of the solenoid valve is normally closed (voltage = open) and direct operating, so no pressure differential is required. Suitable for max media temperature of 130° C (266 ° F) pressure range of 4 - 75 bar (58 - 1088 psi). Housing of stainless steel with teflon (PTFE) sealing and a 1 mm orifice. The Kv-value is 0.03 m3/h (0.5 l/min at dp=1 bar water).

The hard PTFE seal has a poorer tightness than FKM or EPDM. Choose FKM if possible or make sure the pressure difference is greater than 4 bar (60 psi).

View all

Notice: This product will be discontinued in the future

Regular price
$80.50 USD
excl VAT

In stock Ships in 0d On request On request
0 are currently in your cart. For orders exceeding 26, expect an increased lead time of 0 days. Up to 26 items available for online order. For higher quantities, please contact us on support@tameson.com to request the lead time. The item is not available for online order, please contact us on support@tameson.com to request the lead time.


Shipping to United States: $14.95 USD
Free for orders > $390.00 USD
Expected delivery in 2 - 3 business days

Description
Specifications
Downloads
Related products

This is a JP Fluid Control direct operating 2 way solenoid valve with G 1/4 inch threads and a 24 V DC coil. The valve has a stainless steel housing with teflon (PTFE) sealing and an orifice size of 1 mm (approximately 3/64 inch). The circuit function of the solenoid valve is normally closed, which means the valve opens when voltage is applied.
The valve is suitable for pressures of 4 - 75 bar (58 - 1088 psi) and a maximum temperature of 130° C (266° F). The valve has a Kv-value of 0.03 m3/h, which translates to a flow rate of 0.5 l/min at a differential pressure of 1 bar (for water). In imperial units: Cv = 0.03, which means 0.03 GPM @ 1 psi pressure drop. For simple applications it is often enough to select a valve based on the thread size and orifice diameter. For more accurate sizing, use the Kv-value with our easy to use valve sizing calculator.
The stainless steel housing is very durable, strong and resistant to a wide range of chemicals with the exception of chloride solutions. Consult our chemical resistance chart to verify compatibility of housing and seals with the medium. The valve has an IP65 rating if properly connected.

Pros:

  • Suitable for high pressures up to 75 bar
  • Solenoid valves open and close very fast compared to many other valve types
  • Delivered including coil and connector
  • Good protection against the environment thanks to the IP65 rating

Cons:

  • The hard PTFE seal has a poorer tightness than FKM or EPDM. Choose FKM if possible or make sure the pressure difference is greater than 4 bar (60 psi).
  • Solenoid valves are very sensitive to dirt and can only be used with clean liquids and gases
  • Solenoid valves use energy while activated and the coil may get hot. A well ventilated installation environment is recommended to dissipate the heat

HP-DA series

The HP-DA is a directly operated, normally closed 2/2-way solenoid valve, specially designed for high pressure applications. The solenoid valves have an orifice of 3 mm, work from 0 bar and are suitable for very small flow rates. The body is available in brass and stainless steel with NBR, PTFE or FKM seal. The HP-DA solenoid valves are compatible with all the coils from the CS3 series.
The valves are available with BSP or NPT threads on request.