FRL G1/4'' 800 l/min 0.5-9.0bar/7-130psi Manual Plastic EMC 2A
This G 1/4 inch pneumatic FRL (Filter Regulator Lubricator) unit is used to filter out contaminants larger than 5 microns and regulate the output pressure between 0.5 to 9.0 bar (7 to 130 psi) and lubricate the air with oil. The regulator is self-relieving. Includes a pressure gauge. The max flow rate is 800 l/min. The condensate drain is manual, requiring manual release of condensate.Suitable for a 10.0 bar (145 psi) max input and temperatures between -5 and 60 °C (23 and 140 °F). The min flow for oil drip is 26 l/min. The oil capacity is 30 cm3. To adjust the output pressure, pull the hand wheel up and twist. Lock by pushing the wheel back in.
- Regular price
- $52.33 USD
Description
This filter regulator lubricator (FRL) combines three functions. The filter removes water, dirt and other harmful particles larger than 5 microns. The pressure regulator adjusts the pressure continuously to a stable level, even when the input pressure varies. The level can be adjusted between 0.5 to 9.0 bar (7 to 130 psi). The lubricator introduces oil into the pneumatic air to reduce internal friction for pneumatic components. Most modern pneumatic equipment doesn't need lubrication, only use a lubricator if downstream equipment requires it. The recommended lubricating oil type is ISO-VG32 turbine oil. This model has G 1/4 inch ports. The maximum flow rate is 800 l/min. It is recommended to select a filter with a maximum flow rate 1.5 to 2 times higher than the maximum flow rate in your system to avoid excessive pressure drop. Additionally, keep in mind that lower input pressures may reduce the achievable maximum flow rate, so ensure your system pressure is sufficient for optimal performance. Note that the pressure regulator controls the output pressure, not the flow rate. The output pressure can be adjusted by pulling the hand wheel up and twisting. It can be locked after adjustment by pushing the hand wheel back in.
The maximum input pressure is 10.0 bar (145 psi) and the temperature range is between -5 and 60 °C (23 and 140 °F). It has a manual condensate drain with a drain capacity of 11 cm3. There is a built-in pressure relief valve on the outlet side when the set pressure is exceeded. The lubricator requires a minimal flow rate of 26 l/min and can hold 30 cm3 of oil. The housing material is made out of aluminium and the filter and lubricator bowls are made of plastic. It has a mounting bracket to mount it to a wall or your machine.