12mm 3-Way Ball Valve

Notice: This product is discontinued

Discontinued
12mm 3-Way Ball Valve
Image may vary slightly
See specifications for accurate information.
Reference: HBV12-12
Brand: Pisco
This is a 3/2-way ball valve used for directional air flow control with push-in fittings on all three ports.The central port is a 12 mm push-in fittin
View all

Notice: This product is discontinued

Description
Specifications
Downloads

This is a 3-way ball valve used for directional air flow control with push-in fittings on all three ports. It has an L-bore and you can see the circuit connection with the arrows on the handle. Therefore, you can only connect the middle port to one of the other ports.

The central port is a 12 mm push-in fitting and side ports are 12 mm push-in fittings. The push-in fitting provides an easy connection with the tubing. Push the tube in and the fitting will fix it with stainless steel claws.

It is suitable for a maximum operating pressure of 7 bar (101.5 psi. Also suitable for vacuum applications at a pressure of -1 bar (-14.5 psi). It has NBR seals that make it suitable for applications within a temperature range from 0 to 60°C (32 to 140 °F) (no freezing).

Use a quarter-turn handle to open or close the valve. Make sure to turn it completely to avoid damaging the valve.

Pros:

  • Suitable for vacuum applications
  • Equipped with easy to connect push-in fittings

Cons:

  • Dust could damage the pneumatic system if vacuum is applied without a filter on the inlet side

HBV series

The HBV - series includes 3-way shut-off hand valves used for directing the air flow to two desired ports. These valves are equipped with push-in fittings on all three ports. The push-in fitting sizes range from 6 to 12 mm and from 1/4 to 1/2 inch. The valves are suitable for a maximum operating pressure of 9 bar and a vacuum of -1 bar. They are suitable for temperature range from 0 to 60°C (no freezing) thanks to the NBR sealing.