ESYLUX Compact Motion Switch (Complete) - EP10426704
Notice: This product will be discontinued in the future
Esylux Compact PD motion switch (complete), white, diameter 108mm, flush-mounted, presence detector version, protection rating (IP) IP20, optimal mounting height 3m, suitable for ceiling mounting, detector type passive infrared, max. Range frontal 5.5m, remote control.
Notice: This product will be discontinued in the future
Description
A presence detector with a 360° field of detection for ceiling mounting is available. It can reach up to 24 m in diameter at a suggested installation height of 3 m (maximum mounting height 5 m). This device allows for automatic light control (channel 1) to a constant brightness level depending on presence and natural light (1 - 10 V DC interface).
The detector also features a 16 A high-performance relay (tungsten pre-contact), making it suitable for switching capacitive loads such as:
- Electronic ballasts
- Parallel-compensated fluorescent lamps
- Compact fluorescent lamps
- Energy-saving lamps
Default settings ensure immediate operability, and simple programming can be done using a remote control with "blue mode" technology or setting elements. Additionally, an integrated toggle for setting with remote control or by adjusting the controller is included to prevent operating errors and offer tamper protection. Interference sources can be masked by reducing sensitivity using DIP switches.
The device also includes an additional switch input with a toggle function "room = ON + OFF/hallway = ON". The detector can be used as either a fully automatic or semi-automatic device. After the time setting expires, the luminous efficiency reduces to 10% for use as an orientation light for hallways and passageways.
An in-built switch-off warning is included. The default design of the device is flush-mounted, but it can also be surface-mounted or recessed ceiling-mounted with accessories. The cover and design ring are easily replaceable or paintable (available in "silver" as an accessory). The field of detection can be extended by connecting slave devices, and targeted areas can be masked out by means of an enclosed lens mask.