6mm Plastic Air Blow Gun Noise Protection Nozzle
Adjustable flow compressed air blow gun made of POM with a 6 mm hose barb inlet port. The blow gun is equipped with an aluminum nozzle with a sintered brass muffler. Suitable for a maximum operating pressure of 12 bar (174 psi) and temperatures from -20 to 50 °C (-4 to 122 °F). Equipped with NBR sealing.
- Regular price
- $31.89 USD
Description
This is an adjustable flow compressed air blow gun made of POM with a 6 mm hose barb inlet port. The blow gun is equipped with an aluminum nozzle with a sintered brass muffler. The brass muffler reduces the noise level produced by the blow gun.
The air blow gun is suitable for a maximum operating pressure of 12 bar (174 psi) and temperatures from -20 to 50 °C (-4 to 122 °F). Due to the housing material, there is no cold feeling when holding and using the air blow gun. Its sealing is made out of NBR.
At 6 bar (87 psi) the maximum air flow rate is 265 l/min. To operate the air blow gun, connect it to a compressed air hose, point away from yourself and pull the trigger. You can control the air flow by partially pulling the trigger. Always wear protective gear to avoid injuries from any blown debris.
Pros:
- Easy setup and operation
- No cold hands thanks to the plastic housing material
- Mount a hose with a 6 mm inner diameter to the hose pillar
- The flow rate can be adjusted by partially pulling the trigger
- Reduced noise due to the nozzle design
AGLP-ADJ-12 series
The AGLP-ADJ-12 series includes POM compressed air blow guns that provide a flow metering function. They are equipped with various intake port types. Intake port can be a female threaded G 1/4 inch and other options include hose barbs and air couplings, of various sizes, screwed in it. The outlet port can be equipped with a short nozzle, a noise protection nozzle, and extension pipe nozzle and a safety nozzle. These air blow guns are suitable for a maximum operating pressure of 12 bar (174 psi) and temperatures from -20 to 50 °C (-4 to 122°F).
