angle seat piston valves
| Product | Brand | State | Port | Seal | Housing | Function | Min pres | Max pres | Max temp | Series | Min temp |
|---|---|---|---|---|---|---|---|---|---|---|---|
G1'' PTFE 16bar NC Angle Seat Valve Stainless-Steel/Brass...AL2A-SPP-100-B-16
In stock
|
Tameson | Normally closed | 1 inch | PTFE | Stainless steel | 2/2 way | 0 | 16 | 200 | AL2 | -40 |
In stock
|
Tameson | Normally closed | 1 inch | PTFE/NBR | Brass | 2/2 way | 0 | 16 | 85 | AL2 | -20 |
In stock
|
Tameson | Normally closed | 1/2 inch | PTFE/NBR | Brass | 2/2 way | 0 | 16 | 85 | AL2 | -20 |
In stock
|
Tameson | Normally closed | 1/2 inch | PTFE | Stainless steel | 2/2 way | 0 | 25 | 200 | AL2 | -40 |
In stock
|
Tameson | Normally closed | 3/4 inch | PTFE/NBR | Brass | 2/2 way | 0 | 16 | 85 | AL2 | -20 |
In stock
|
Tameson | Normally closed | 3/4 inch | PTFE | Stainless steel | 2/2 way | 0 | 20 | 200 | AL2 | -40 |
+3 days
|
Tameson | Normally open | 1 inch | PTFE/NBR | Brass | 2/2 way | 0 | 16 | 85 | AL2 | -20 |
G3/4'' PTFE/NBR 16bar NC Angle Seat Valve (Closes Ag....AL2A-BPN-034-B-C
+3 days
|
Tameson | Normally closed | 3/4 inch | PTFE/NBR | Brass | 2/2 way | 0 | 16 | 85 | AL2 | -20 |
+3 days
|
Tameson | Normally open | 1-1/2 inch | PTFE/NBR | Brass | 2/2 way | 0 | 16 | 85 | AL2 | -20 |
G1/2'' PTFE 25bar NC Angle Seat Valve (Closes Ag. Flow)...AL2A-SPP-012-B-C
+3 days
|
Tameson | Normally closed | 1/2 inch | PTFE | Stainless steel | 2/2 way | 0 | 25 | 200 | AL2 | -40 |
G2'' PTFE 4bar NC Angle Seat Valve Stainless-Steel/Brass AL2AL2A-SPP-200-B-4
+3 days
|
Tameson | Normally closed | 2 inch | PTFE | Stainless steel | 2/2 way | 0 | 4 | 200 | AL2 | -40 |
G2'' PTFE 12bar NO Angle Seat Valve Stainless-Steel/Brass...AL2B-SPP-200-A-12
+3 days
|
Tameson | Normally open | 2 inch | PTFE | Stainless steel | 2/2 way | 0 | 12 | 200 | AL2 | -20 |
+3 days
|
Tameson | Normally closed | 1/2 inch | PTFE/NBR | Brass | 2/2 way | 0 | 16 | 85 | AL2 | -20 |
G1'' PTFE/NBR 16bar NC Angle Seat Valve (Closes Ag. Flow)...AL2A-BPN-100-B-C-10
+3 days
|
Tameson | Normally closed | 1 inch | PTFE/NBR | Brass | 2/2 way | 0 | 10 | 85 | AL2 | -20 |
+3 days
|
Tameson | Normally open | 1/2 inch | PTFE/NBR | Brass | 2/2 way | 0 | 16 | 85 | AL2 | -20 |
angle seat piston valves
Pneumatic angle seat valves are valves where the valve seat is placed at an angle. A spindle is moved in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is usually brass or stainless steel. Due to the Y-shape the medium can flow through relatively easily (few bends). As a result, these valves have a high flow capacity and Kv value in comparison with vertical globe valves. Angle seat valves are reliable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be applied with gases, vacuum or (viscous) liquids and seal in two directions. Other names for these valves are valve shut-off valve, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.
