Angle seat valve 

Angle seat valve

Angle seat valves are valves where a spindle under an angle moves the seal in a linear motion towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is usually brass or stainless steel. Due to the Y-shape the medium can flow through relatively easily (few bends). As a result, these valves have a high flow capacity and Kv value in comparison with vertical globe valves. Angle seat valves are reliable, require low maintenance and are characterized by a long lifespan with millions of cycles. They are used with gases, vacuum or (viscous) liquids and seal in two directions. Other names for these valves are valve shut-off valves, Y-valves or globe valves. The valves can be manually operated by means of a screw spindle, or air operated by a piston that moves in an air cylinder. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.

There are 39 products.

Subcategories

Showing 1 - 39 of 39 items

This Rp1" messing angle seat valve with EPDM is suitable for drinking water (DVGW) or other neutral liquids from 0-10 bar and temperatures between 0-90°C. Thanks to the Y-shape, the flow resistance is very low. Maintenance free and very reliable. Operate the valve gradually with the ergonomic knob (no water hammer, partially open possible).

25,99 €  (31,45 € tax incl.)
In stock
In Stock

This Rp3/4" messing angle seat valve with EPDM is suitable for drinking water (DVGW) or other neutral liquids from 0-10 bar and temperatures between 0-90°C. Thanks to the Y-shape, the flow resistance is very low. Maintenance free and very reliable. Operate the valve gradually with the ergonomic knob (no water hammer, partially open possible).

18,99 €  (22,98 € tax incl.)
In stock
In Stock

This Rp1/2" messing angle seat valve with EPDM is suitable for drinking water (DVGW) or other neutral liquids from 0-10 bar and temperatures between 0-90°C. Thanks to the Y-shape, the flow resistance is very low. Maintenance free and very reliable. Operate the valve gradually with the ergonomic knob (no water hammer, partially open possible).

12,99 €  (15,72 € tax incl.)
In stock
In Stock

This stainless steel normally closed G 1" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 16 bar and temperatures from -40 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

219,99 €  (266,19 € tax incl.)
In stock
In Stock

This stainless steel normally closed G 3/4" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 20 bar and temperatures from -40 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

189,99 €  (229,89 € tax incl.)
In stock
In Stock

This stainless steel normally closed G 1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 25 bar and temperatures from -40 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

179,99 €  (217,79 € tax incl.)
In stock
In Stock

This brass normally closed G 1" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 16 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip: for...

109,99 €  (133,09 € tax incl.)
In stock
In Stock

This brass normally closed G 3/4" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 16 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip:...

109,99 €  (133,09 € tax incl.)
In stock
In Stock

This brass normally closed G 1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 16 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip:...

99,99 €  (120,99 € tax incl.)
In stock
In Stock

This G3" messing angle seat valve with EPDM is suitable for drinking water (DVGW) or other neutral liquids from 0-10 bar and temperatures between 0-90°C. Thanks to the Y-shape, the flow resistance is very low. Maintenance free and very reliable. Operate the valve gradually with the ergonomic knob (no water hammer, partially open possible).

417,99 €  (505,77 € tax incl.)
Request lead time
Out of stock
Out of stock

This G2-1/2" messing angle seat valve with EPDM is suitable for drinking water (DVGW) or other neutral liquids from 0-10 bar and temperatures between 0-90°C. Thanks to the Y-shape, the flow resistance is very low. Maintenance free and very reliable. Operate the valve gradually with the ergonomic knob (no water hammer, partially open possible).

308,99 €  (373,88 € tax incl.)
Request lead time
Out of stock
Out of stock

This G2" messing angle seat valve with EPDM is suitable for drinking water (DVGW) or other neutral liquids from 0-10 bar and temperatures between 0-90°C. Thanks to the Y-shape, the flow resistance is very low. Maintenance free and very reliable. Operate the valve gradually with the ergonomic knob (no water hammer, partially open possible).

101,99 €  (123,41 € tax incl.)
Request lead time
Out of stock
Out of stock

This G1-1/2" messing angle seat valve with EPDM is suitable for drinking water (DVGW) or other neutral liquids from 0-10 bar and temperatures between 0-90°C. Thanks to the Y-shape, the flow resistance is very low. Maintenance free and very reliable. Operate the valve gradually with the ergonomic knob (no water hammer, partially open possible).

60,99 €  (73,80 € tax incl.)
Request lead time
Out of stock
Out of stock

This G1-1/4" messing angle seat valve with EPDM is suitable for drinking water (DVGW) or other neutral liquids from 0-10 bar and temperatures between 0-90°C. Thanks to the Y-shape, the flow resistance is very low. Maintenance free and very reliable. Operate the valve gradually with the ergonomic knob (no water hammer, partially open possible).

52,99 €  (64,12 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally open G 2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 12 bar and temperatures from -20 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

699,99 €  (846,99 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally open G 2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 4 bar and temperatures from -20 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip:...

529,99 €  (641,29 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally open G 1-1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 20 bar and temperatures from -20 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

599,99 €  (725,99 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally open G 1-1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 7 bar and temperatures from -20 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

419,99 €  (508,19 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally open G 1-1/4" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 25 bar and temperatures from -20 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

559,99 €  (677,59 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally open G 1" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively FKM. Suited from 0 to 16 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip:...

359,99 €  (435,59 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally open G 1" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 16 bar and temperatures from -20 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

319,99 €  (387,19 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally open G 3/4" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 20 bar and temperatures from -20 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

289,99 €  (350,89 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally open G 1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 25 bar and temperatures from -20 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

279,99 €  (338,79 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally closed G 2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 4 bar and temperatures from -40 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

349,99 €  (423,49 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally closed G 1-1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 7 bar and temperatures from -40 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped...

319,99 €  (387,19 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally closed G 3/4" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 20 bar and temperatures from -40 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

199,99 €  (241,99 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally closed G 1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 25 bar and temperatures from -40 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

229,99 €  (278,29 € tax incl.)
Request lead time
Out of stock
Out of stock

This stainless steel normally closed G 1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE. Suited from 0 to 25 bar and temperatures from -40 up to 200°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design....

179,99 €  (217,79 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally open G 2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 11 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip: for...

349,99 €  (423,49 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally open G 1-1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 16 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip:...

309,99 €  (375,09 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally open G 1" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 16 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip: for...

189,99 €  (229,89 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally open G 3/4" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 16 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip: for...

179,99 €  (217,79 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally open G 1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 16 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip: for...

179,99 €  (217,79 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally closed G 2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 4 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip: for...

219,99 €  (266,19 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally closed G 1-1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 6 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip:...

199,99 €  (241,99 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally closed G 1-1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 8 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip:...

159,99 €  (193,59 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally closed G 1" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 10 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip: for...

119,99 €  (145,19 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally closed G 3/4" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 16 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip:...

109,99 €  (133,09 € tax incl.)
Request lead time
Out of stock
Out of stock

This brass normally closed G 1/2" angle seat piston valve provides reliable shut-off control for gases and fluids. The seat and spindle seal are respectively PTFE/NBR. Suited from 0 to 16 bar and temperatures from -20 up to 85°C. The valve operates with compressed air of preferably 6 bars. Excellent flow rate thanks to the Y-shaped design. Tip:...

99,99 €  (120,99 € tax incl.)
Request lead time
Out of stock
Out of stock
Thumbnail Product
Down up
Price
Down up
Function
Down up
Port
Down up
Seal
Down up
Min pres (bar)
Down up
Max pres (bar)
Down up
Kv (m3/h)
Down up
Orifice (mm)
Down up
State
Down up
Housing
Down up
Max temp (°C)
Down up
Series
Down up
G1'' Brass Angle Seat Valve EPDM 10 bar Drinking Water- AL2BM

AL2BM-100

25,99 €   (31,45 € tax incl.)

In stock

2 way 1 inch EPDM 0 10 19.92 25   Brass 90 AL2BM
G3/4'' Brass Angle Seat Valve EPDM 10 bar Drinking Water- AL2BM

AL2BM-034

18,99 €   (22,98 € tax incl.)

In stock

2 way 3/4 inch EPDM 0 10 9.39 20   Brass 90 AL2BM
G1/2'' Brass Angle Seat Valve EPDM 10 bar Drinking Water- AL2BM

AL2BM-012

12,99 €   (15,72 € tax incl.)

In stock

2 way 1/2 inch EPDM 0 10 5.12 15   Brass 90 AL2BM
G1'' PTFE 16bar NC Angle Seat Valve Stainless-Steel/Brass AL2

AL2A-SPP-100-B-16

219,99 €   (266,19 € tax incl.)

In stock

2/2 way 1 inch PTFE 0.0 16     Normally closed Stainless steel 200 AL2
G3/4'' PTFE 20bar NC Angle Seat Valve Stainless-Steel/Brass AL2

AL2A-SPP-034-B-20

189,99 €   (229,89 € tax incl.)

In stock

2/2 way 3/4 inch PTFE 0.0 20     Normally closed Stainless steel 200 AL2
G1/2'' PTFE 25bar NC Angle Seat Valve Stainless-Steel/Brass AL2

AL2A-SPP-012-B

179,99 €   (217,79 € tax incl.)

In stock

2/2 way 1/2 inch PTFE 0.0 25     Normally closed Stainless steel 200 AL2
G1'' PTFE/NBR 16bar NC Angle Seat Valve Brass AL2

AL2A-BPN-100-B

109,99 €   (133,09 € tax incl.)

In stock

2/2 way 1 inch PTFE/NBR 0.0 16     Normally closed Brass 85 AL2
G3/4'' PTFE/NBR 16bar NC Angle Seat Valve Brass AL2

AL2A-BPN-034-B

109,99 €   (133,09 € tax incl.)

In stock

2/2 way 3/4 inch PTFE/NBR 0.0 16     Normally closed Brass 85 AL2
G1/2'' PTFE/NBR 16bar NC Angle Seat Valve Brass AL2

AL2A-BPN-012-B

99,99 €   (120,99 € tax incl.)

In stock

2/2 way 1/2 inch PTFE/NBR 0.0 16     Normally closed Brass 85 AL2
G3'' Brass Angle Seat Valve EPDM 10 bar Drinking Water- AL2BM

AL2BM-300

417,99 €   (505,77 € tax incl.)

Request lead time

2 way 3 inch EPDM 0 10   80   Brass 90 AL2BM
G2-1/2'' Brass Angle Seat Valve EPDM 10 bar Drinking Water- AL2BM

AL2BM-212

308,99 €   (373,88 € tax incl.)

Request lead time

2 way 2-1/2 inch EPDM 0 10   65   Brass 90 AL2BM
G2'' Brass Angle Seat Valve EPDM 10 bar Drinking Water- AL2BM

AL2BM-200

101,99 €   (123,41 € tax incl.)

Request lead time

2 way 2 inch EPDM 0 10 92 50   Brass 90 AL2BM
G1-1/2'' Brass Angle Seat Valve EPDM 10 bar Drinking Water- AL2BM

AL2BM-112

60,99 €   (73,80 € tax incl.)

Request lead time

2 way 1-1/2 inch EPDM 0 10 49.23 40   Brass 90 AL2BM
G1-1/4'' Brass Angle Seat Valve EPDM 10 bar Drinking Water- AL2BM

AL2BM-114

52,99 €   (64,12 € tax incl.)

Request lead time

2 way 1-1/4 inch EPDM 0 10 32.16 32   Brass 90 AL2BM
G2'' PTFE 12bar NO Angle Seat Valve Stainless-Steel/Brass AL2

AL2B-SPP-200-A-12

699,99 €   (846,99 € tax incl.)

Request lead time

2/2 way 2 inch PTFE 0.0 12     Normally open Stainless steel 200 AL2
G2'' PTFE 4bar NO Angle Seat Valve Stainless-Steel/Brass AL2

AL2B-SPP-200-B-4

529,99 €   (641,29 € tax incl.)

Request lead time

2/2 way 2 inch PTFE 0.0 4     Normally open Stainless steel 200 AL2
G1-1/2'' PTFE 20bar NO Angle Seat Valve Stainless-Steel/Brass AL2

AL2B-SPP-112-A-20

599,99 €   (725,99 € tax incl.)

Request lead time

2/2 way 1-1/2 inch PTFE 0.0 20     Normally open Stainless steel 200 AL2
G1-1/2'' PTFE 7bar NO Angle Seat Valve Stainless-Steel/Brass AL2

AL2B-SPP-112-B-7

419,99 €   (508,19 € tax incl.)

Request lead time

2/2 way 1-1/2 inch PTFE 0.0 7     Normally open Stainless steel 200 AL2
G1-1/4'' PTFE 25bar NO Angle Seat Valve Stainless-Steel/Brass AL2

AL2B-SPP-114-A

559,99 €   (677,59 € tax incl.)

Request lead time

2/2 way 1-1/4 inch PTFE 0.0 25     Normally open Stainless steel 200 AL2
G1'' PTFE/FKM 16bar NO Angle Seat Valve Stainless-Steel/Brass AL2

AL2B-SFF-100-B-16

359,99 €   (435,59 € tax incl.)

Request lead time

2/2 way 1 inch FKM 0.0 16     Normally open Stainless steel 85 AL2
G1'' PTFE 16bar NO Angle Seat Valve Stainless-Steel/Brass AL2

AL2B-SPP-100-B-16

319,99 €   (387,19 € tax incl.)

Request lead time

2/2 way 1 inch PTFE 0.0 16     Normally open Stainless steel 200 AL2
G3/4'' PTFE 20bar NO Angle Seat Valve Stainless-Steel/Brass AL2

AL2B-SPP-034-B-20

289,99 €   (350,89 € tax incl.)

Request lead time

2/2 way 3/4 inch PTFE 0.0 20     Normally open Stainless steel 200 AL2
G1/2'' PTFE 25bar NO Angle Seat Valve Stainless-Steel/Brass AL2

AL2B-SPP-012-B

279,99 €   (338,79 € tax incl.)

Request lead time

2/2 way 1/2 inch PTFE 0.0 25     Normally open Stainless steel 200 AL2
G2'' PTFE 4bar NC Angle Seat Valve Stainless-Steel/Brass AL2

AL2A-SPP-200-B-4

349,99 €   (423,49 € tax incl.)

Request lead time

2/2 way 2 inch PTFE 0.0 4     Normally closed Stainless steel 200 AL2
G1-1/2'' PTFE 7bar NC Angle Seat Valve Stainless-Steel/Brass AL2

AL2A-SPP-112-B-7

319,99 €   (387,19 € tax incl.)

Request lead time

2/2 way 1-1/2 inch PTFE 0.0 7     Normally closed Stainless steel 200 AL2
G3/4'' PTFE 20bar NC Angle Seat Valve (Closes Ag. Flow) Stainless-Steel/Brass AL2

AL2A-SPP-034-B-C-20

199,99 €   (241,99 € tax incl.)

Request lead time

2/2 way 3/4 inch PTFE 0.0 20     Normally closed Stainless steel 200 AL2
G1/2'' PTFE 25bar NC Angle Seat Valve Stainless-Steel AL2

AL2A-SPP-012-SG

229,99 €   (278,29 € tax incl.)

Request lead time

2/2 way 1/2 inch PTFE 0.0 25     Normally closed Stainless steel 200 AL2
G1/2'' PTFE 25bar NC Angle Seat Valve (Closes Ag. Flow) Stainless-Steel/Brass AL2

AL2A-SPP-012-B-C

179,99 €   (217,79 € tax incl.)

Request lead time

2/2 way 1/2 inch PTFE 0.0 25     Normally closed Stainless steel 200 AL2
G2'' PTFE/NBR 11bar NO Angle Seat Valve Brass/Alu AL2

AL2B-BPN-200-A-11

349,99 €   (423,49 € tax incl.)

Request lead time

2/2 way 2 inch PTFE/NBR 0.0 11     Normally open Brass 85 AL2
G1-1/2'' PTFE/NBR 16bar NO Angle Seat Valve Brass/Alu AL2

AL2B-BPN-112-A

309,99 €   (375,09 € tax incl.)

Request lead time

2/2 way 1-1/2 inch PTFE/NBR 0.0 16     Normally open Brass 85 AL2
G1'' PTFE/NBR 16bar NO Angle Seat Valve Brass AL2

AL2B-BPN-100-B

189,99 €   (229,89 € tax incl.)

Request lead time

2/2 way 1 inch PTFE/NBR 0.0 16     Normally open Brass 85 AL2
G3/4'' PTFE/NBR 16bar NO Angle Seat Valve Brass AL2

AL2B-BPN-034-B

179,99 €   (217,79 € tax incl.)

Request lead time

2/2 way 3/4 inch PTFE/NBR 0.0 16     Normally open Brass 85 AL2
G1/2'' PTFE/NBR 16bar NO Angle Seat Valve Brass AL2

AL2B-BPN-012-B

179,99 €   (217,79 € tax incl.)

Request lead time

2/2 way 1/2 inch PTFE/NBR 0.0 16     Normally open Brass 85 AL2
G2'' PTFE/NBR 4bar NC Angle Seat Valve Brass AL2

AL2A-BPN-200-B-4

219,99 €   (266,19 € tax incl.)

Request lead time

2/2 way 2 inch PTFE/NBR 0.0 4     Normally closed Brass 85 AL2
G1-1/2'' PTFE/NBR 6bar NC Angle Seat Valve (Closes Ag. Flow) Brass AL2

AL2A-BPN-112-B-C-6

199,99 €   (241,99 € tax incl.)

Request lead time

2/2 way 1-1/2 inch PTFE/NBR 0.0 6     Normally closed Brass 85 AL2
G1-1/2'' PTFE/NBR 8bar NC Angle Seat Valve Brass AL2

AL2A-BPN-112-B-8

159,99 €   (193,59 € tax incl.)

Request lead time

2/2 way 1-1/2 inch PTFE/NBR 0.0 8     Normally closed Brass 85 AL2
G1'' PTFE/NBR 16bar NC Angle Seat Valve (Closes Ag. Flow) Brass AL2

AL2A-BPN-100-B-C-10

119,99 €   (145,19 € tax incl.)

Request lead time

2/2 way 1 inch PTFE/NBR 0.0 10     Normally closed Brass 85 AL2
G3/4'' PTFE/NBR 16bar NC Angle Seat Valve (Closes Ag. Flow) Brass AL2

AL2A-BPN-034-B-C

109,99 €   (133,09 € tax incl.)

Request lead time

2/2 way 3/4 inch PTFE/NBR 0.0 16     Normally closed Brass 85 AL2
G1/2'' PTFE/NBR 16bar NC Angle Seat Valve (Closes Ag. Flow) Brass AL2

AL2A-BPN-012-B-C

99,99 €   (120,99 € tax incl.)

Request lead time

2/2 way 1/2 inch PTFE/NBR 0.0 16     Normally closed Brass 85 AL2
Showing 1 - 39 of 39 items