This modulating electrical actuator allows you to control quarter turn (ball or butterfly) valves. It has an operating torque of 300 Nm and an operating time of 58 seconds with a 85-240 V AC/DC supply voltage. It is a modulating actuator with a digital positioning system (DPS), so the position of the valve can be modulated between 0-90 degrees with a control signal of 4-20 mA. Actuator mounts to a quarter turn valve with an ISO 5211 F07 or F10 flanges. Durable polyamide (PA) housing, IP67 protection, and suitable for ambient environment temperature of -20 to 70 °C.
This modulating electrical actuator allows you to control quarter turn (ball or butterfly) valves. It has an operating torque of 300 Nm (higher break torque so please see the manual) and can open/close the valve in 58 seconds with a duty cycle of 75%. It requires a supply voltage of 85-240 V AC/DC and it has a visual positioning indicator on top of the unit to clearly see valve position. As a modulating actuator, it is equipped with a digital positioning system (DPS) meaning it can position the valve anywhere between 0-90 degrees. It requires a control signal of 4-20 mA for positioning. As standard, it does have a manual operation cogwheel for manually rotating the actuator’s stem in case of emergency. It is designed to mount to a quarter turn ball or butterfly valve that has an ISO 5211 F07 or F10 flange with a 22 mm star connection for square drive shafts. It has a durable polyamide (PA) housing making an IP67 enclosure capable of operating in an environment of -20 to 70 °C. Before connecting the actuator, please read the manual carefully.
The J3C high voltage electric valve actuators from manufacturer J+J offers an impressive list of standard features that include protection against damage from over-torque or condensation. Actuators are also available with different options like fail-safe BSR (Battery Safety Return) or modulating called DPS (Digital Positioning System). The series has an operating torque range between 20-300 Nm. The J3C fail-safe or modulating electric actuator is the same as the standard on-off J3C actuator but a BSR and/or a DPS kit is added inside the actuator. The J3C BSR fail-safe actuator can be set to fail open or fail closed. The J3C DPS modulating actuator can be controlled with 4-20 mA or 0-10 V (0-10 V on request).