CS3 coil DIN-A connector 230V AC

Reference: CS3-230AC

USD $23.35

CS3 coil DIN-A connector 230V AC

Name: CS3 coil DIN-A connector 230V AC
Brand: JP Fluid Control
SKU: CS3-230AC
Price: 23.35 USD
Availability: InStock

1 / 9

2 / 9

3 / 9

4 / 9

5 / 9

6 / 9

7 / 9

8 / 9

9 / 9

Reference: CS3-230AC

Brand: JP Fluid Control

230V AC coil from the CS3 series. Suitable for solenoid valves of a part of the TW-DA, TW-DD and HP-DA series of JP Fluid Control.

Including connector

View all

USD $23.35

Order before 16h CEST (mo-fr), same day shipment

2 year warranty, Returns 30 days

Customers rate us: 9.38 / 10 380 reviews

Customers rate us:

9.38 / 10

380 reviews

Description
Specification
Downloads
Accessories

Description

Dimensions

Dimensions of the CS3 coil in mm.

Solenoid valve coil of the JP Fluid Control series (230V AC) including DIN-A connector. Please look at the table below to see which solenoid valves are suitable for this coil.

Valve Series	Function	Orifice	230VAC	24VDC	24VAC	12VDC	120VAC
ST-DA / ST-SA / ST-IA	NC	3 - 50 mm	CS1	CS1	CS1	CS1	CS1
ST-DB	NO	1 - 4 mm	CS1	CS1	CS1	CS1	CS1
TW-DB / TW-DC / TP	3/2 NO/DI	1.5 - 3 mm	CS1	CS1	CS1	CS1	CS1
LP	NO	6 - 9 mm	CS1	CS1	CS1	CS1	CS1
LP	NO	19 - 45 mm	CS2	CS2	CS2	CS2	CS2
ST-IB	NO	13 - 50 mm	CS2	CS2	CS2	CS2	CS2
DF-SA	NC	16 - 25 mm	CS2	CS2	CS2	CS2	CS2
DF-SA	NC	32 - 50 mm	CS8	CS8	CS8	CS8	CS8
DF-SB	NO	16 - 25 mm	CS2	CS2	CS2	CS2	CS2
TW-DA / TW-DD	3/2 NC/UN	1.5 - 3 mm	CS3	CS3	CS3	CS3	CS3
HP-DA	NC	1 - 1.5 mm	CS3	CS3	CS3	CS3	CS3
CM	NC	2 - 12 mm	CS4	CS4	CS4	CS4	CS4
HP-IA	NC	8 - 15 mm	CS5	CS5	CS5
PV	NC	15 - 45 mm	CS6	CS6	CS6	CS6	CS6
PS Type A	3/2, 5/2, 5/3		CP1	CP1	CP1	CP1	CP1
PS Type B/C/D	3/2, 5/2, 5/3		CP2	CP2	CP2	CP2	CP2

NC= Normally Closed, NO = Normally Open, DI = diverting, UN = universal

Important

Please make sure that the type of coil is suitable for the type of solenoid valve.
Only use the correct power supply as specified on the label. DC voltage applied to an AC voltage coil can lead to damage.
Never power the coil when it is not mounted on the solenoid valve. The coil will overheat and may burn out.
The coil is only properly insulated if all components, cables and connectors are properly connected.
The coil heats up during use. This is normal. Do not touch the coil or valve when it is hot.

Downloads

Safety instructions pdf Download

CAD cs3.zip zip Download

Specification

Voltage

230 V AC
Material

Epoxy
Diameter inner (mm)

14.7
Electrical connection

DIN-A
Nominal power (VA)

27
Duty cycle

100
Type of accessory/spare part

Magnetic core
Height (mm)

38

Accessories

Connector with LED (DIN - A)

AS-CAL

In stock

$5.99

Connector (DIN-A) with 3m cable and LED

AF-CAL3M

In stock

$17.34

Selection Wizard

Complete the questions to find suitable valves directly:

2-way
3-way

Type:

2-Way Solenoid Valve

2-Way Electric Ball Valve

Solenoid Valve or Ball Valve?

Solenoid Valves: 2-Way Solenoid Valve

The valve is actuated with an electric current through the solenoid (electromagnet).

Switches directly.
From 1/8 inch up to 2 inch.
Normally Closed or Normally Open.
Only for clean media.
Uses energy as long as electrically energized.
(Semi-)direct operated: from 0 bar pressure differential.
Indirect operated: from ±0.5 bar pressure diff.
Only one direction of pressure.
Brass, Stainless Steel or Plastic housing.
EPDM, FKM, NBR of PTFE seals.

Electric Ball Valves: 2-Way Electric Ball Valve

The flow is controlled with a drilled sphere (ball) which rotates around its axis, perpendicular to the bore. The ball rotates with the help of an electric motor.

Operates from 0 bar.
Close gradually (±10s).
Energy efficient.
1/2, 3/4 or 1 inch.
For both flow directions.
Brass Housing / PTFE sealing.
Less sensitive to dirt.

Function:

NC = Normally Closed (most chosen): The valve is closed when the coil is not electrically energized.
NO = Normally Open: The valve is open when the coil is not electrically energized.

System:

Indirect operated solenoid valves need a pressure differential over the inlet and outlet port for proper operation. If the pressure differential is too low (f.e. a gravity fed system or a closed circuit), only (semi-)direct operated solenoid valves can be used. These operate from a zero bar pressure differential.

Medium:

The type of medium defines the material choice of the valve body and seals. By selecting 'Other', you can choose the material for the valve body and seals.

Tip: Use the material table.

Valve:

Seal:

Port:

Most valves are provided with internal thread (BSPP = British Standard Pipe Parallel). Use the table as a guideline for sizing:

Valve	Pipe ∅
1/8 inch	± 4 - 8 mm
1/4 inch	± 6 - 12 mm
3/8 inch	± 8 - 15 mm
1/2 inch	± 10 - 16 mm
3/4 inch	± 15 - 22 mm
1 inch	± 20 - 30 mm
1½ inch	± 25 - 50 mm
2 inch	± 40 - 60 mm