Solenoid Valve 20x23mm Welded End NC Stainless Steel EPDM 0.2-10bar/3-145psi 24VDC 5282 172684

Solenoid Valve 20x23mm Welded End NC Stainless Steel EPDM 0.2-10bar/3-145psi 24VDC 5282 172684
Solenoid Valve 20x23mm Welded End NC Stainless Steel EPDM 0.2-10bar/3-145psi 24VDC 5282 172684
Reference: 172684
Brand: Burkert

Burkert 2/2 way solenoid valve (type 5282) with 20x23 mm welded end and a 24 V DC coil. The valve can be set to normally closed (default setting) or normally open. The valve is indirect operating, so a small differential pressure required. Suitable for slightly contaminated and aggressive media (media separation). Suitable for max media temperatures of 90 °C (194 °F) and a pressure range of 0.2 to 10 bar (3 to 145 psi). Housing of stainless steel with EPDM sealing and a 20 mm orifice. The Kv-value is 5 m3/h (83.35 l/min at dp = 1 bar water). Manual override feature.
Note: DIN connector not included.

View all
Note: product cannot be returned
Regular price
$1204.61
excl VAT

In stock +38 days On request On request
0 are currently in your cart. For orders exceeding 0, expect an increased lead time of 38 days. Up to 1 items available for online order. For higher quantities, please contact us on support@tameson.com to request the lead time. The item is not available for online order, please contact us on support@tameson.com to request the lead time.


Shipping to United States: Free
Free for orders > $390.00
Expected delivery in 40 - 41 business days

Description
Specifications
Downloads
Related products

This is a Burkert indirect operating 2/2 way solenoid valve with 20x23 mm welded end and a 24 V DC coil. The valve has a stainless steel housing with EPDM sealing and an orifice size of 20 mm. The circuit function of the solenoid valve is normally closed, which means the valve opens when voltage is applied. However, the function can easily be changed between NC and NO by rotating the pilot valve on the top side by 180 degrees. Suitable for a pressure range of 0.2 to 10 bar (3 to 145 psi) and a maximum temperature of 90 °C (194 °F). The valve has a Kv-value of 5 m3/h, this translates to a flow rate of 83 l/min at a differential pressure of 1 bar (for water). In imperial units: Cv = 6, which means 6 GPM @ 1 psi pressure drop. For many applications it is enough to select a valve based on the thread size and orifice diameter. For more accurate sizing, use the Kv-value with our easy to use valve sizing calculator. This model is media separated. This means that the working parts such as the spring are separated from the media by a flexible membrane, which makes it possible to use of slightly contaminated and aggressive media. The stainless steel housing is very durable, strong and resistant to a wide range of chemicals with the exception of chloride solutions. The EPDM (ethylene propylene diene monomer rubber) sealing is suited for neutral fluids and many chemicals, but it has poor resistance to oils and fats. Please note that the internal valve parts, such as the stainless steel plunger and springs, are also in contact with the medium and must be chemically compatible. Consult our chemical resistance chart to verify compatibility of housing and seals with the medium. The manual override feature can be used to commission the system. The valve has an IP65 rating if properly connected.

Pros:

  • The manual override is ideal for commissioning and in case of power outage
  • Good protection against the environment thanks to the IP65 rating
  • Solenoid valves open and close very fast compared to many other valve types
  • Diaphragm designed to separate aggressive and contaminated media

Cons:

  • Not suited for low pressure differentials (< 0.2 bar). In case of low pressure or a vacuum, consider a (semi-)direct solenoid valve
  • The coil may get hot when energized. A well ventilated environment is recommended
  • DIN connector not included

Series:

The Bürkert 5282 solenoid valve is used for the most demanding applications. The valve is built to last. The media separation makes the 5282 also suitable for aggressive media. The valve is equipped with standard features such as a manual override and adjustable opening and closing times. Furthermore, the circuit function can easily be changed from NC to NO, by simply rotating the 3/2 way pilot valve on top of the main valve body. The 5282 valve is available with a wide variation of housing and sealing materials. The brass housing satisfies all European drinking water requirements. Various ATEX versions are available for potentially explosive environment.

Please note: this product is made to order and can unfortunately not be returned.