No products found with current parameters. Try to go back and adjust/reset the filters or select another product category below.
3-Way ball valve (L-boring) with G1-1/2 inch thread (F/F/F) with ISO-Top (5211 F05), suitable for drive with an electric or pneumatic actuator. Nickel plated brass body with hard chromed ball and PTFE/NBR seals. 32 mm nominal diameter and max working pressure 40 bar. For water, oil, air or gas. Temperature range from -10 to 100°C.
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
3-Way (L-bore) ball valve of brass from Tameson with G1-1/2 inch pipe threads (BSPP) and a full bore (32 mm).
|Diagram||The ports overlap during rotation.|
|Ports||G1-1/2" BSP (F/F/F)|
|Housing||Brass (CW 617N)|
|Ball||Hard chrome plated brass|
|Seals||PTFE (seal rings), NBR (O-rings)|
|Nominal Diameter||32 mm|
|Kv value||70 m3/h|
|Operation||Suitable for automatic control (no manual lever)|
|ISO 5211 flange||F05 - 14mm square|
|Max pressure||40 bar|
|Temperature||-10°C .. 100°C|
The valve has female thread on all three ports (1-1/2 inch). This is BSPP (British Standard Pipe Parallel). With our range of 1-1/2" fittings, the valve can be installed in any pipe (recommended pipe diameter ± 40 - 60 mm).
The valve has a flange according to the ISO 5211 F05 norm. This makes the valve suitable for electric or pneumatic actuation. The valve is not equipped with a lever for manual control.
This ball valve is part of the BL3BAL series. The housing of the valve is made of brass, the ball is made of hard chromed brass and the seals are made of PTFE/NBR. The valve is suitable for various media, such as water, oil or air up to a maximum of 40 bar. For corrosive or aggressive media, a valve made of plastic or stainless steel is better suited. The valve can be used up to a max pressure of 40 bar and a temperature between -10 and 100 °C.