No products found with current parameters. Try to go back and adjust/reset the filters or select another product category below.
2-Way ball valve with G1-1/2 inch threads (F/F) and ISO-Top (F05,F07) and 40mm nominal diameter and max pressure 63 bar. Temperature range from -20 to 180°C. Stainless steel housing with stainless steel ball and PTFE/FKM seals.
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
2-Way ball valve of stainless steel with 3-piece construction from Tameson with G1-1/2 inch pipe threads (BSPP) and a full bore (40 mm).
|Ports||G1-1/2" BSP (F/F)|
|Housing||Stainless steel (AISI 316)|
|Ball||RVS (AISI 316)|
|Seals||PTFE 15% GF (seal rings), FKM (O-rings)|
|Nominal Diameter||40 mm (full bore)|
|Kv value||170 m3/h|
|Operation||Suitable for automatic control (no manual lever)|
|ISO 5211 flange||F05 and F07 - 14mm square|
|Max pressure||63 bar|
|Temperature||-20°C .. 180°C|
The valve has female thread on both sides (1-1/2 inch). This is BSPP (British Standard Pipe Parallel). With our range of 1-1/2" fittings, the valve can be installed in any pipe (recommended pipe diameter ± 40 - 60 mm). Because of the 3-piece construction, the valve can easily be inspected or revised without removing the complete valve from the piping. The middle part can be removed including ball and seat rings.
The valve has a flange according to the ISO 5211 F05/F07 norm. This makes the valve suitable for electric or pneumatic actuation. The valve is not equipped with a lever for manual control.
This ball valve is part of the BL2SA3 series. The housing of the valve is made of stainless steel, the ball is made of stainless steel and the seals are made of PTFE/FKM. The valve is suitable for various aggressive and corrosive media. The valve can be used up to a max pressure of 63 bar and a temperature between -20 and 180 °C.