No products found with current parameters. Try to go back and adjust/reset the filters or select another product category below.
2-Way ball valve with G3/4 inch threads (F/F) and lockable lever for open/close control. 20mm nominal diameter and max pressure 85 bar. Temperature range from -40 to 220°C. Stainless steel housing with stainless steel ball and PTFE seals.
Expiry item - as long as stock extends
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
2-Way ball valve of stainless steel from JP Fluid Control with G3/4 inch pipe threads (BSPP) and a full bore (20 mm). The valve has a pvc coated lever for manual control and is lockable. The ball valves in the 660-series of JP Fluid Control are characterized by long life.
|Ports||G3/4" BSP (F/F)|
|Housing||Stainless steel (AISI 316)|
|Ball||RVS (AISI 316)|
|Nominal Diameter||20 mm (full bore)|
|Kv value||45 m3/h|
|Operation||Lever (pvc coated)|
|Max pressure||85 bar|
|Temperature||-40°C .. 220°C|
The valve has female thread on both sides (3/4 inch). This is BSPP (British Standard Pipe Parallel). With our range of 3/4" fittings, the valve can be installed in any pipe (recommended pipe diameter ± 15 - 22 mm).
This ball valve can be manually operated by a lever. By rotating 90 degrees, the valve is open or closed. If the lever is perpendicular to the pipe, the valve is closed. This valve is not suitable for electrical or pneumatical control. For this purpose, valves with ISO-Top flange (ISO 5211) are recommended.
This ball valve is part of the 660 series. The housing of the valve is made of stainless steel, the ball is made of stainless steel and the seals are made of PTFE. The valve is suitable for various aggressive and corrosive media. The valve can be used up to a max pressure of 85 bar and a temperature between -40 and 220 °C.
Maximum pressure versus temperature - 660-series.