2-Way ball valve with 50mm solvent sockets and lever for open/close control. 40mm nominal diameter and max pressure 16 bar. Temperature range from -10 to 60°C. PVC housing with PVC ball, PE seat rings and EPDM O-rings.
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
2-Way ball valve of pvc from Tameson with 50mm solvent sockets on both ends. Thanks to the true union design, the valve can be easily installed or removed. The valve has a full bore (40 mm). The valve has a red handle for manual control.
|Ports||50mm solvent sockets|
|Seals||PE (seal rings), EPDM (O-rings)|
|Nominal Diameter||40 mm (full bore)|
|Kv value||170 m3/h|
|Operation||PVC Lever (red)|
|Max pressure||16 bar|
|Temperature||-10°C .. 60°C|
This ball valve can be manually operated by a lever. By rotating 90 degrees, the valve is open or closed. If the lever is perpendicular to the pipe, the valve is closed. This valve is not suitable for electrical or pneumatical control. For this purpose, valves with ISO-Top flange (ISO 5211) are recommended.
This ball valve is part of the BMP series. The housing of the valve is made of pvc, the ball is made of pvc, de seat rings are made of PE and the O-rings are made of EPDM. The valve is suitable for various media and is often used in applications such as irrigation, swimming pools, water supply and drainage. The valve can be used up to a max pressure of 16 bar and a temperature between -10 and 60 °C.