2-Way ball valve with G3/4 inch threads (F/F) and lever for open/close control. 20mm nominal diameter and max pressure 20 bar. Provided with drain cock. Temperature range from -10 to 110°C. Nickel plated brass hard chromed ball and PTFE seals.
Expiry item - as long as stock extends
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
2-Way ball valve of nickel plated brass from JP Fluid Control with G3/4 inch pipe threads (BSPP) and a full bore (20 mm). The valve has an integrated bleed point for pressure control or discharge from heating systems. The valve has a pvc coated lever for manual control. The ball valves in the 68-series of JP Fluid Control are characterized by long life.
|Ports||G3/4" BSP (F/F)|
|Housing||Nickel plated brass (CW 617N)|
|Ball||Hard chrome plated brass|
|Nominal Diameter||20 mm (full bore)|
|Operation||Lever (pvc coated)|
|Max pressure||20 bar|
|Temperature||-10°C .. 110°C|
The valve has female thread on both sides (3/4 inch). This is BSPP (British Standard Pipe Parallel). With our range of 3/4" fittings, the valve can be installed in any pipe (recommended pipe diameter ± 15 - 22 mm).
This ball valve can be manually operated by a lever. By rotating 90 degrees, the valve is open or closed. If the lever is perpendicular to the pipe, the valve is closed. This valve is not suitable for electrical or pneumatical control. For this purpose, valves with ISO-Top flange (ISO 5211) are recommended.
This ball valve is part of the 68 series. The housing of the valve is made of nickel plated brass, the ball is made of hard chromed brass and the seals are made of PTFE. The valve is suitable for various media, such as water, oil or air up to a maximum of 20 bar. For corrosive or aggressive media, a valve made of plastic or stainless steel is better suited. The valve can be used up to a max pressure of 20 bar and a temperature between -10 and 110 °C.