No products found with current parameters. Try to go back and adjust/reset the filters or select another product category below.
2-Way ball valve with G1 inch thread (F/F) with ISO-Top (5211 F03), suitable for drive with an electric or pneumatic actuator. Nickel plated brass body with hard chromed ball and PTFE/FKM seals (silicone free). 25 mm nominal diameter and max working pressure 40 bar. For water, oil, air, gas or vacuum. Temperature range from -20 to 160°C. Complies with EN 311 and may be used for natural gas or liquid gas (max 5 bar and 60°C).
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
2-Way ball valve of brass from Tameson with G1 inch pipe threads (BSPP) and a full bore (25 mm). The ball valve features an ISO 5211 flange and therefore it can be fitted with an electric or pneumatic actuator. The valve has no lever for manual control.
|Ports||G1" BSP (F/F)|
|Housing||Brass (CW 617N)|
|Ball||Hard chrome plated brass|
|Seals||PTFE (seal rings), FKM (O-rings)|
|Nominal Diameter||25 mm (full bore)|
|Kv value||60 m3/h|
|Operation||Suitable for automatic control (no manual lever)|
|ISO 5211 flange||F03 - 9mm square|
|Max pressure||40 bar (For gases pressure PN5 / MOP 5)|
|Temperature||-20°C .. 160°C (for gas max. 60°C)|
|Norms||EN 331 (Gas Appliances)- DVGW approval only between G1/2"-G2"!|
The valve has female thread on both sides (1 inch). This is BSPP (British Standard Pipe Parallel). With our range of 1" fittings, the valve can be installed in any pipe (recommended pipe diameter ± 20 - 30 mm).
The valve has a flange according to the ISO 5211 F03 norm. This makes the valve suitable for electric or pneumatic actuation. The valve is not equipped with a lever for manual control.
This ball valve is part of the BL2BA series. The housing of the valve is made of brass, the ball is made of hard chromed brass and the seals are made of PTFE/FKM. The valve is suitable for various media, such as water, oil or air up to a maximum of 40 bar. For corrosive or aggressive media, a valve made of plastic or stainless steel is better suited. The valve can be used up to a max pressure of 40 bar and a temperature between -20 and 160 °C.