No products found with current parameters. Try to go back and adjust/reset the filters or select another product category below.
2-Way ball valve with G1/2 inch threads (F/F) and lever for open/close control. 15mm nominal diameter and max pressure 20 bar. Approval for gas appliances. Temperature range from -20 to 60°C. Nickel plated brass hard chromed ball and PTFE seals.
Expiry item - as long as stock extends
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
2-Way ball valve of nickel plated brass from JP Fluid Control with G1/2 inch pipe threads (BSPP) and a full bore (15 mm). The 100 series is suitable for gas applications and meets the EN-331 standard. The valve has a pvc coated lever for manual control. The ball valves in the 100-series of JP Fluid Control are characterized by long life.
|Ports||G1/2" BSP (F/F)|
|Housing||Nickel plated brass (CW 617N)|
|Ball||Hard chrome plated brass|
|Nominal Diameter||15 mm (full bore)|
|Kv value||20 m3/h|
|Operation||Lever (pvc coated)|
|Max pressure||20 bar|
|Temperature||-20°C .. 60°C|
|Certification||Gas Appliances EN 331 (ITS, DVGW, GASTEC, ..)|
The valve has female thread on both sides (1/2 inch). This is BSPP (British Standard Pipe Parallel). With our range of 1/2" fittings, the valve can be installed in any pipe (recommended pipe diameter ± 10 - 16 mm).
This ball valve can be manually operated by a lever. By rotating 90 degrees, the valve is open or closed. If the lever is perpendicular to the pipe, the valve is closed. This valve is not suitable for electrical or pneumatical control. For this purpose, valves with ISO-Top flange (ISO 5211) are recommended.
This ball valve is part of the 100 series and conforms to the EN 331 standard (application in gas installations). The housing of the valve is made of nickel plated brass, the ball is made of hard chromed brass and the seals are made of PTFE. The valve can be used up to a max pressure of 20 bar and a temperature between -20 and 60 °C.