Sorry for the inconvenience.
No products found with current parameters. Try to reset filters.
160A - 2-Way Ball Valve Full Bore 22mm Compression Ends - Gas
2-Way ball valve with 22mm compression ends and lever for open/close control. 20mm nominal diameter and max pressure 16 bar. Approval for gas appliances. Temperature range from -20 to 60°C. Nickel plated brass hard chromed ball and PTFE seals.
Expiry item - as long as stock extends
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
2-Way ball valve of nickel plated brass from JP Fluid Control with 22mm compression ends. The valve has a full bore (20 mm). The 160A series is suitable for gas applications (meets the EN-331 standard). The valve is operated by a butterfly handle. The ball valves in the 160A-series of JP Fluid Control are characterized by long life.
|Ports||22mm compression ends|
|Housing||Nickel plated brass (CW 617N)|
|Ball||Hard chrome plated brass|
|Nominal Diameter||20 mm (full bore)|
|Kv value||45 m3/h|
|Max pressure||16 bar|
|Temperature||-20°C .. 60°C|
|Norms||EN 331, ITS (Gas Appliances)|
InstallationThe valve is on both sides equipped with integrated compression fittings (22mm), this way the valve can be directly installed in the piping.
This ball valve can be manually operated by a lever. By rotating 90 degrees, the valve is open or closed. If the lever is perpendicular to the pipe, the valve is closed. This valve is not suitable for electrical or pneumatical control. For this purpose, valves with ISO-Top flange (ISO 5211) are recommended.
This ball valve is part of the 160A series and conforms to the EN 331 standard (application in gas installations). The housing of the valve is made of nickel plated brass, the ball is made of hard chromed brass and the seals are made of PTFE. The valve can be used up to a max pressure of 16 bar and a temperature between -20 and 60 °C.
Maximum pressure versus temperature - 160A-series.
HousingNickel plated brass