Electrical Ball Valve BW3 1'' 3-way 24V DC 3-point
BW3-100-AW1-024DC
USD $99.75

Electrical Ball Valve BW3 1'' 3-way 24V DC 3-point

Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
1 / 10
Electrical Ball Valve BW3...
2 / 10
Electrical Ball Valve BW3...
3 / 10
Electrical Ball Valve BW3...
4 / 10
Electrical Ball Valve BW3...
5 / 10
Electrical Ball Valve BW3...
6 / 10
Electrical Ball Valve BW3...
7 / 10
Electrical Ball Valve BW3...
8 / 10
Electrical Ball Valve BW3...
9 / 10
Electrical Ball Valve BW3...
10 / 10
BW3-100-AW1-024DC

3 way electrical ball valve with 1 inch female threads (BSP) and energy efficient 24V DC actuator. Suitable for liquids and gases (max 110°C) and a pressure from 0-10 bar. Suitable as zone valve in heating systems. The valve has a brass housing with chromed ball and PTFE valve seats. The nominal diameter is 18 mm, the Kv value is 16 m3/h (266.7 l/min at dP=1 bar, water). 3-wire connection (3-point): neutral wire and 2 control wires (to open/close). The valve opens in 6s.

Including actuator
View all
USD $99.75

In stock

Shipping to:

Estimate based on cart value including this product quantity.
UPS Express saver
Free from $377.00
$9.95

Order before 16h CEST (mo-fr), same day shipment

2 year warranty, Returns 30 days


Customers rate us: 9.72 / 10 191 reviews
Customers rate us:

Description

Very energy efficient and robust 3 way JP Fluid Control electric ball valve to open or close pipes electrically. The valve has 1 inch threads (female thread BSPP) and a 24V DC actuator (IP54). This valve is suitable for liquids and gases (-10 to 110°C) and is often used in heating systems. A ball valve is less sensitive to dirt than a solenoid valve. It is however recommended to install a filter before the valve. The valve body is made of brass, the ball is chrome plated and the seal is PTFE (Teflon). The orifice is 18 mm, the Kv-value is 16 (266.7 l/min at dP=1 bar). The time for opening or closing is approximately 6 seconds. This 3/2-way ball valve is best used to change flow direction from one output to the other, not stop the flow.

Installation

The actuator has a 3-wire connection, and must be connected as shown in the diagram below. The actuator is supplied with a cable. The actuator has 3-point control. One wire is permanently connected to the minus. The other two wires are control wires to rotate the ball in both directions (connect to the plus). Please note: never connect the two control wires at the same time, this could damage the actuator! The actuators can be supplied with an integrated relay (On-Off control), in that case only one control wire is needed. The actuator includes limit switches, energy is only consumed during opening or closing of the valve.

The 3-way valves can be connected in two different ways as shown in the schematic below.

Important

  • Please observe the color coding of the wires. Never connect the two control wires at the same time, the actuator will be damaged.
  • Suitable for clean gases and liquids, including cold & hot water.
  • Make sure that the valve is suitable for the application and that the materials are suitable for the medium and the temperature.

Note: this valve is not suited for dry gases such as unlubricated compressed air.

Downloads

CAD bw3-100-aw1.zip zip Download save_alt
Manual BW (NL) pdf Download save_alt
Manual BW (EN) pdf Download save_alt
Safety instructions pdf Download save_alt

Specification

  • Connection sizeinfo
    1 inch
  • Voltageinfo
    24 V DC
  • Materialinfo
    Brass
  • Control signalinfo
    Three-point (open-close)
  • Torque (Nm)info
    2.5
  • Ball bore
    T-bore
  • Max pressure (bar)info
    10
  • Connection type
    Inner thread cylindrical BSPP-G
  • Max temperature (°C)
    110
  • Manual operation
    No
  • Min temperature (°C)
    -10
  • Valve bore (mm)
    18
  • Kv value (m3/h)info
    16
  • Operating time (s)
    6
  • Degree of protection (IP)
    IP54
  • Nominal power (VA)
    3
  • Position feedback
    None
  • Transmission
    With cogwheels
  • Adjustable operating range
    No
  • Surface protectioninfo
    Untreated
  • Ambient temperature (°C)
    50 °C to 50 °C
  • Height (mm)
    125
  • Width (mm)
    84
  • Spindle seal material
    EPDM
  • Max. electric power input (VA)
    3
  • Material ball seal
    Teflon (PTFE)

Accessories

R1''(M) x G3/4'' (F) reducer bushing
20809
In stock
Price $7.30
R1''xR1'' nipple
20007
Not in stock
Price $7.53
Request lead time
25mmxG 1'' Hose barb male thread
401053
In stock
Price $9.44
Thread sealant Loxeal Blue (50ml)
5503050LOXEAL
In stock
Price $15.65
G1''x22mm Compression Fitting WRAS
CFM22100
In stock
Price $5.90
G1''x28mm Compression Fitting WRAS
CFM28100
In stock
Price $6.83
G1''xG3/4'' Adapter Nipple M/M
RNM100034
In stock
Price $2.37
G1-1/4''xG1'' Adapter Nipple M/M
RNM114100
In stock
Price $4.16
G1-1/2''xG1'' Adapter Nipple M/M
RNM112100
In stock
Price $5.90