Max pressure (bar) info

Kv value (m3/h) info

Min temperature (°C)

Max temperature (°C)

Degree of protection (IP)

3-way electric ball valves

Select and buy a 3-way electric ball valve online for your application. The 3-way ball valve is used for mixing, distributing, or diverting media as it has 3 ports. The electric actuator is capable of turning the internal ball that has a bore... Read more Read more

Product Brand Connection size Voltage Material Control signal Torque (Nm) Max pressure (bar) Connection type Manual override Valve bore (mm) Ball bore Kv value (m3/h) Min temperature (°C) Max temperature (°C) Operating time (s) Degree of protection (IP) Nominal power (VA) Position feedback Spindle seal material Surface protection Material ball seal With end contacts Frequency Transmission Adjustable operating range Ambient temperature (°C) Height (mm) Width (mm) Max. electric power input (VA)
Electrical Ball Valve BW3...
In stock
JP Fluid Control 1 inch 230 V AC Brass Two-point (open-close) 4 10 Inner thread cylindrical... No 18 T-port 16 -10 110 16 IP54 5 None EPDM Untreated Teflon (PTFE) Yes 50 Hz With cogwheels No 50 °C to 50 °C 125 84 5
Electrical Ball Valve BW3...
In stock
JP Fluid Control 1 inch 230 V AC Brass Three-point (open-close) 4 10 Inner thread cylindrical... No 18 T-port 16 -10 110 16 IP54 5 None EPDM Untreated Teflon (PTFE) Yes 50 Hz With cogwheels No 50 °C to 50 °C 125 84 5
Electrical Ball Valve BW3...
In stock
JP Fluid Control 3/4 inch 230 V AC Brass Two-point (open-close) 4 10 Inner thread cylindrical... No 12.5 T-port 8.6 -10 110 16 IP54 5 None EPDM Untreated Teflon (PTFE) Yes 50 Hz With cogwheels No 50 °C to 50 °C 120 84 5
Electrical Ball Valve BW3...
In stock
JP Fluid Control 1/2 inch 24 V DC Brass Two-point (open-close) 2.5 10 Inner thread cylindrical... No 10 T-port 6.4 -10 110 6 IP54 3 None EPDM Untreated Teflon (PTFE) Yes - With cogwheels No 50 °C to 50 °C 120 84 3
Electrical Ball Valve BW3...
In stock
JP Fluid Control 1/2 inch 12 V DC Brass Two-point (open-close) 2.5 10 Inner thread cylindrical... No 10 T-port 6.4 -10 110 6 IP54 3 None EPDM Untreated Teflon (PTFE) Yes - With cogwheels No 50 °C to 50 °C 125 84 3
Electrical Ball Valve BW3...
In stock
JP Fluid Control 1/2 inch 230 V AC Brass Two-point (open-close) 4 10 Inner thread cylindrical... No 10 T-port 6.4 -10 110 16 IP54 5 None EPDM Untreated Teflon (PTFE) Yes 50 Hz With cogwheels No 50 °C to 50 °C 120 84 5
Electrical Ball Valve BW3...
In stock
JP Fluid Control 1 inch 24 V DC Brass Two-point (open-close) 2.5 10 Inner thread cylindrical... No 18 T-port 16 -10 110 6 IP54 3 None EPDM Untreated Teflon (PTFE) Yes - With cogwheels No 50 °C to 50 °C 125 84 3
Electrical Ball Valve BW3...
In stock
JP Fluid Control 3/4 inch 24 V DC Brass Two-point (open-close) 2.5 10 Inner thread cylindrical... No 12.5 T-port 8.6 -10 110 6 IP54 3 None EPDM Untreated Teflon (PTFE) Yes - With cogwheels No 50 °C to 50 °C 120 84 3
Electrical Ball Valve BW3...
In stock
JP Fluid Control 3/4 inch 12 V DC Brass Two-point (open-close) 2.5 10 Inner thread cylindrical... No 12.5 T-port 8.6 -10 110 6 IP54 3 None EPDM Untreated Teflon (PTFE) Yes - With cogwheels No 50 °C to 50 °C 125 84 3
Electrical Ball Valve BW3...
In stock
JP Fluid Control 3/4 inch 230 V AC Brass Three-point (open-close) 4 10 Inner thread cylindrical... No 12.5 T-port 8.6 -10 110 16 IP54 5 None EPDM Untreated Teflon (PTFE) Yes 50 Hz With cogwheels No 50 °C to 50 °C 120 84 5
Electrical Ball Valve BW3...
In stock
JP Fluid Control 1 inch 24 V DC Brass Three-point (open-close) 2.5 10 Inner thread cylindrical... No 18 T-port 16 -10 110 6 IP54 3 None EPDM Untreated Teflon (PTFE) Yes - With cogwheels No 50 °C to 50 °C 125 84 3
Electrical Ball Valve BW3...
In stock
JP Fluid Control 1/2 inch 230 V AC Brass Three-point (open-close) 4 10 Inner thread cylindrical... No 10 T-port 6.4 -10 110 16 IP54 5 None EPDM Untreated Teflon (PTFE) Yes 50 Hz With cogwheels No 50 °C to 50 °C 120 84 5
Electrical Ball Valve BW3...
In stock
JP Fluid Control 1 inch 12 V DC Brass Two-point (open-close) 2.5 10 Inner thread cylindrical... No 18 T-port 16 -10 110 6 IP54 3 None EPDM Untreated Teflon (PTFE) Yes - With cogwheels No 50 °C to 50 °C 125 84 3
Electrical Ball Valve BW3...
In stock
JP Fluid Control 1/2 inch 24 V DC Brass Three-point (open-close) 2.5 10 Inner thread cylindrical... No 10 T-port 6.4 -10 110 6 IP54 3 None EPDM Untreated Teflon (PTFE) Yes - With cogwheels No 50 °C to 50 °C 120 84 3
Electrical Ball Valve BW3...
In stock
JP Fluid Control 3/4 inch 24 V DC Brass Three-point (open-close) 2.5 10 Inner thread cylindrical... No 12.5 T-port 8.6 -10 110 6 IP54 3 None EPDM Untreated Teflon (PTFE) Yes - With cogwheels No 50 °C to 50 °C 120 84 3
3-way electric ball valves

3-way electric ball valves

Select and buy a 3-way electric ball valve online for your application. The 3-way ball valve is used for mixing, distributing, or diverting media as it has 3 ports. The electric actuator is capable of turning the internal ball that has a bore in it to switch the circuit functions and direct, mix, or stop the media flow. They are one of the most common valves due to their simple operation, reliability, long service life, and wide range of application uses. Various connection styles are available (threaded, cutting ring, etc.) for easy application installation.

Other main selection criteria for 3-way electric ball valves include: L-port or T-port, housing material, connection size, seal material, pressure rating, and temperature rating.

  • 3-way brass ball valves have brass as their housing material. They are very common, durable, and can be used with water, compressed air, oils, non-aggressive media, and much more. They commonly have water or gas approvals, making them excellent 3 way water or gas control valves.
  • 3-way stainless steel ball valves have stainless steel as their housing material. They are typically used for aggressive and corrosive media. Stainless steel is also highly wear, temperature, and pressure resistant.

3-way

A 3-way ball valve has 3 ports. There are two design types: L-port and T-port. This refers to the bore design in the ball, which is the media flow path. With a 3-way valve with actuator and a T-port or L-port, it is possible to do mixing, distribution, or diverting of the media flow. Therefore, it is important to know your bore design to ensure your desired media flow is possible as the ports can be in different positions. The pressure inlet for 3-way ball valves is typically on the center borehole, to avoid leakage, unelss defined otherwise in the product specifications. These 3-way electric ball valves are motorized and can be controlled remotely to switch between the citcuits. If electrical voltage is already available, a 3-way control valve is a good investment to automate the process.

For additional information to select a ball valve, read our technical article or contact customer support.