G4'' 24-240V AC/DC Modulating 2-Way Stainless steel Ball valve

Notice: This product is discontinued

Discontinued
G4'' 24-240V AC/DC Modulating 2-Way Stainless steel Ball valve
Reference: V2S56
Brand: Tameson

This modulating electrical actuator is offered in combination with a 2-way stainless steel ball valve. Actuator requires 24-240 V AC/DC to operate. It is a modulating actuator with a digital positioning system (DPS). The ball valve has two G4" inner thread connection points. Orifice of 100 mm (Kv value 1230 m3/h), medium temperature range of -20 – 180 °C, and a max pressure of 63 bars. 3-Piece design allowing it to be taken apart and thoroughly cleaned. With the actuator’s polyamide (PA) housing, it gives the unit a protection of IP67 for an environment temperature of -20 till 70 °C.

View all
Note: product cannot be returned

Notice: This product is discontinued

Description
Specifications
Downloads
Related products

This modulating electrical actuator is offered in combination with a 2-way ball valve. It can turn the valve from 0-90 degrees in 34 seconds with an operating torque of 140 Nm (higher break torque so please see the manual). It requires a supply voltage of 24-240 V AC/DC supply voltage, has a duty cycle of 75%, and comes with a visual positioning indicator on top of the unit to clearly see valve position. As a modulating actuator, it is equipped with a digital positioning system (DPS) meaning it can position the valve anywhere between 0-90 degrees. It requires a control signal of 4-20 mA/0-10 V for positioning. As standard, it does have a manual operation cogwheel for manually turning the valve if needed. The actuator is mounted on the ball valve via the ISO 5211 F07 or F10 flange (22 mm). The 2-way stainless steel valve has two connection points of G4". The medium flows through a 100 mm bore (Kv value of 1230 m3/h) and the temperature can be between -20 – 180 °C under 63 bars. It has a spindle seal material of PTFE. The ball valve has a 3-piece design allowing it to be taken apart and thoroughly cleaned. With the actuator’s durable polyamide (PA) housing, it gives the unit a protection of IP67 for an environment temperature of -20 till 70 °C. Before connecting the actuator, please read the manual carefully.

Pros:

  • It is a modulating actuator with a digital positioning system (DPS) to position the valve anywhere between 0-90 degrees with a control signal of 4-20 mA/0-10 V
  • It has a robust IP67 housing
  • As standard, it does have a manual operation cogwheel for manually turning the valve if needed
  • It has a clear visual position indicator to see the valve’s state
  • The ball valve has a 3-piece design allowing it to be taken apart and thoroughly cleanedlanges

Cons:

  • The actuator is not equipped with a battery safety return (BSR) but can be operated manually if power fails
  • In comparison to a pneumatic actuator of the same size, the operating speed is slower

J4C series

BL2SA3 Ball valve

The BL2SA3 series ball valves are reliable 2-way ball valves with a stainless steel housing. The ball is also made of stainless steel and the valve seats are made of PTFE/FKM. The valve is suitable for various aggressive and corrosive media up to a maximum of 63 bar. Suitable for temperatures between -20 and 180 degrees Celsius and available from size G 1/4" to G 4". Ball valves from the BL2SA3 series all have an ISO 5211 top flange (from F03 to max. F10) which makes the mounting of an actuator possible.

J4C Actuator

The J4C high voltage electric valve actuators from manufacturer J+J offers an impressive list of standard features that include protection against damage from over-torque or condensation. Actuators are also available with different options like fail-safe BSR (Battery Safety Return) or modulating called DPS (Digital Positioning System). The series has an operating torque range between 20-300 Nm.
The J4C fail-safe or modulating electric actuator is the same as the standard on-off J4C actuator but a BSR and/or a DPS kit is added inside the actuator. The J4C BSR fail-safe actuator can be set to fail open or fail closed. The J4C DPS modulating actuator can be controlled with 4-20 mA or 0-10 V (0-10 V on request).

Spare parts

Below is a list of the spare parts for this unit should they be needed. Simply use the SKU number in our search bar to find the proper part.

Ball valve: BL2SA3-400
Actuator: V2S3X

Note: This product is delivered in separate parts, but with the required mounting accessories.