Electrical Ball Valve BW2 1/2'' 2-way 230V AC relay
BW2-012-AW1-R230AC
USD $66.11

Electrical Ball Valve BW2 1/2'' 2-way 230V AC relay

Electrical Ball Valve BW2...
Electrical Ball Valve BW2...
Electrical Ball Valve BW2...
Electrical Ball Valve BW2...
Electrical Ball Valve BW2...
Electrical Ball Valve BW2...
Electrical Ball Valve BW2...
Electrical Ball Valve BW2...
Electrical Ball Valve BW2...
Electrical Ball Valve BW2...
Electrical Ball Valve BW2...
1 / 10
Electrical Ball Valve BW2...
2 / 10
Electrical Ball Valve BW2...
3 / 10
Electrical Ball Valve BW2...
4 / 10
Electrical Ball Valve BW2...
5 / 10
Electrical Ball Valve BW2...
6 / 10
Electrical Ball Valve BW2...
7 / 10
Electrical Ball Valve BW2...
8 / 10
Electrical Ball Valve BW2...
9 / 10
Electrical Ball Valve BW2...
10 / 10
BW2-012-AW1-R230AC

2 way electrical ball valve with 1/2 inch female threads (BSP) and energy efficient 230V AC actuator with integrated relay. Suitable for liquids and gases (max 110°C) and a pressure from 0-10 bar. Suitable as zone valve in heating systems. The valve has a brass housing with chromed ball and PTFE valve seats. The nominal diameter is 12mm, the Kv value is 8.6m3/h (143.3 l/min at dP=1 bar, water). 3-wire connection (open-close): phase, neutral and control wire (phase). The valve opens in 16s (normally closed).

Including actuator
View all
USD $66.11

In stock

Shipping to:

Estimate based on cart value including this product quantity.
UPS Express saver
Free from $377.00
$9.95

Order before 16h CEST (mo-fr), same day shipment

2 year warranty, Returns 30 days


Customers rate us: 9.74 / 10 195 reviews
Customers rate us:

Description

Very energy efficient and robust 2 way JP Fluid Control electric ball valve to open or close pipes electrically. The valve has 1/2 inch threads (female thread BSPP) and a 230V AC actuator (IP54). This valve is suitable for liquids and gases (-10 to 110°C) and is often used in heating systems. A ball valve is less sensitive to dirt than a solenoid valve. It is however recommended to install a filter before the valve. The valve body is made of brass, the ball is chrome plated and the seal is PTFE (Teflon). The orifice is 12 mm, the Kv-value is 8.6 (143.3 l/min at dP=1 bar). The time for opening or closing is approximately 16 seconds.

Installation

The actuator has a 3-wire connection, and must be connected as shown in the diagram below. The actuator is supplied with a cable. The actuator has On/Off control. This means that two wires are permanently connected to the power supply. Powering the control wire opens the valve electrically, disconnecting the control wire will close the valve electrically. The actuator includes limit switches, energy is only consumed during opening or closing of the valve.

Important

  • Please observe the color coding of the wires.
  • Suitable for clean gases and liquids, including cold & hot water.
  • Make sure that the valve is suitable for the application and that the materials are suitable for the medium and the temperature.

Note: this valve is not suited for dry gases such as unlubricated compressed air.

Downloads

Manual BW (NL) pdf Download save_alt
Manual BW (EN) pdf Download save_alt
CAD bw2-012-aw1.zip zip Download save_alt
Safety instructions pdf Download save_alt

Specification

  • Connection sizeinfo
    1/2 inch
  • Voltageinfo
    230 V AC
  • Max pressure (bar)info
    10
  • Control signalinfo
    Two-point (open-close)
  • Nominal power (VA)
    5
  • Connection type
    Inner thread cylindrical BSPP-G
  • Materialinfo
    Brass
  • Min temperature (°C)
    -10
  • Kv value (m3/h)info
    8.6
  • Max temperature (°C)
    110
  • Manual operation
    No
  • Operating time (s)
    16
  • Degree of protection (IP)
    IP54
  • Torque (Nm)info
    4
  • Width (mm)
    84
  • Max. electric power input (VA)
    5
  • Surface protectioninfo
    Untreated
  • Valve bore (mm)
    12
  • With end contacts
    Yes
  • Height (mm)
    120
  • Spindle seal material
    EPDM
  • Frequency
    50 Hz
  • Ambient temperature (°C)
    50 °C to 50 °C
  • Transmission
    With cogwheels
  • Adjustable operating range
    No
  • Material ball seal
    Teflon (PTFE)

Accessories

Thread sealant Loxeal Blue (50ml)
5503050LOXEAL
In stock
Price $15.65
G1/2''x15mm Compression Fitting WRAS
CFM15012
In stock
Price $2.77
G1/2''xG1/4'' Adapter Nipple M/M
RNM012014
In stock
Price $1.21
G1/2''xG3/8'' Adapter Nipple M/M
RNM012038
In stock
Price $1.21
G3/4''xG1/2'' Adapter Nipple M/M
RNM034012
In stock
Price $1.79