Tameson uses cookies and collects information about the use of the website. We do this to analyze and improve the website and to ensure that you receive relevant information and promotions. By using the website you agree to the use of cookies.
An overview of available 2-way electric actuated ball valves. 2-Way valves have 2 ports (inlet/outlet) and 2 positions (Open/Closed) and are ideal for on/off flow control. The ball has one passage which connects the inlet and outlet of the...
Read moreRead more
An overview of available 2-way electric actuated ball valves. 2-Way valves have 2 ports (inlet/outlet) and 2 positions (Open/Closed) and are ideal for on/off flow control. The ball has one passage which connects the inlet and outlet of the valve when open and closes off the inlet and outlet of the valve when turned 90 degrees.
Selection Wizard
Selection Wizard
Complete the questions to find suitable valves directly:
Solenoid Valves:
The valve is actuated with an electric current through the solenoid (electromagnet).
Switches directly.
From 1/8 inch up to 2 inch.
Normally Closed or Normally Open.
Only for clean media.
Uses energy as long as electrically energized.
(Semi-)direct operated: from 0 bar pressure differential.
Indirect operated: from ±0.5 bar pressure diff.
Only one direction of pressure.
Brass, Stainless Steel or Plastic housing.
EPDM, FKM, NBR of PTFE seals.
Electric Ball Valves:
The flow is controlled with a drilled sphere (ball) which rotates around its axis, perpendicular to
the bore.
The ball rotates with the help of an electric motor.
NC = Normally Closed (most chosen): The valve is closed when the coil is not
electrically
energized.
NO = Normally Open: The valve is open when the coil is not electrically energized.
Indirect operated solenoid valves need a pressure differential over the inlet and outlet port for
proper
operation. If the pressure differential is too low (f.e. a gravity fed system or a closed circuit),
only
(semi-)direct operated solenoid valves can be used. These operate from a zero bar pressure
differential.
The type of medium defines the material choice of the valve body and seals. By selecting 'Other',
you can
choose the material for the valve body and seals.
3-Way Solenoid Valve (orifice <3mm):For small flow rate, such as actuation of a
cylinder,
a
(small) fuel system, a test setup, etc. 3-Weg Electric Ball Valve (bore >8mm):For
larger
flow rates, such as central heating, irrigation, compressed air etc.
Choose the right circuit function. The upper diagram shows the flow when the coil is not powered.
The lower
diagram shows the flow when the coil is powered.
personGood service, great assortment and nice communication.
19/11/2019
personParfait
18/11/2019
personThe price was a bit steep for a set of 6 Burkert valves , but in the end, the quality is fantastic.
18/11/2019
personYou guys really go the extra mile
18/11/2019
personVery easy to deal with. Order came very quickly, I was surprised.
16/11/2019
Magnus B.
personWill keep shopping at tameson.com. UPS pickup-point is great.
13/11/2019
Michael Barrett B.
personI found the part with a simple search on google. You had the part I needed at a good price. I was very impressed with everything from the shipping video to receiving the part in 3 days.
I wish more business had that level of pride that Tameson showed on this order.
Thank you.