threadlockers

A threadlocker is used to lock bolts, studs nuts and screws and to avoid loosening caused by stress and vibration. They replace traditional mechanical washers and fasteners. Threadlockers are chemicals that cure anaerobically and form a strong... Read more Read more

Product Brand Strength Surface material Volume (ml) Min temperature (°C) Max thread size Max temperature (°C) Color Max. bonding gap (mm) Breaking torque (Nm) Approval
Loctite 243 Blue 5 ml...
$10.43
+2 days
Loctite Medium (hard disassembly) Metal 5 -55 M36 180 Blue - - -
Loctite 243 Blue 10 ml...
$17.62
+3 days
Loctite Medium (hard disassembly) Metal 10 -55 M36 180 Blue - - -
Loctite 222 Purple 10 ml...
$17.62
+3 days
Loctite Low (easy disassembly) Metal 10 -55 M36 150 Purple - - -
Loxeal 83-54 Green 10 ml...
$8.46
+3 days
Loxeal High (permanent) Metal 10 -55 M25 200 Green 0.2 25 Nm to 35 Nm -
Loctite 290 Green 10 ml...
$17.62
+3 days
Loctite High (permanent) Metal 10 -55 M6 150 Green - - -
Loxeal 24-18 Purple 50 ml...
$24.35
+2 days
Loxeal Low (easy disassembly) Metal 50 -55 M24 150 Purple 0.2 5 Nm to 8 Nm Gas
Loctite 2701 Green 5 ml...
$10.31
+3 days
Loctite High (permanent) Metal 5 -55 M20 150 Green - - Gas
Loxeal 70-14 Green 50 ml...
$25.51
+3 days
Loxeal High (permanent) Metal 50 -55 M5 150 Green 0.07 11 Nm to 25 Nm -
Loctite 243 Blue 250 ml...
$284.19
+3 days
Loctite Medium (hard disassembly) Metal 250 -55 M36 180 Blue - - -
Loctite 2701 Green 10 ml...
$19.70
+2 days
Loctite High (permanent) Metal 10 -55 M20 150 Green - - Gas
Loctite 270 Green 50 ml...
$68.43
+3 days
Loctite High (permanent) Metal 50 -55 M20 180 Green - - -
Loctite 243 Blue 50 ml...
$68.43
+2 days
Loctite Medium (hard disassembly) Metal 50 -55 M36 180 Blue - - -
Loctite 270 Green 10 ml...
$17.62
+2 days
Loctite High (permanent) Metal 10 -55 M20 180 Green - - -
Loctite 272 Red 50 ml...
$77.70
+3 days
Loctite High (permanent) Metal 50 -55 M80 200 Red - - -
Loctite 290 Green 250 ml...
$284.19
+3 days
Loctite High (permanent) Metal 250 -55 M6 150 Green - - -
threadlockers

threadlockers

A threadlocker is used to lock bolts, studs nuts and screws and to avoid loosening caused by stress and vibration. They replace traditional mechanical washers and fasteners. Threadlockers are chemicals that cure anaerobically and form a strong film in the holes between the thread of the connection, locking it in place. Various versions are available with different curing times, maximum strength (easy to dismantle, possible to dismantle and permanently locked) and temperature ranges. These products are suitable to lock bolts, stud nuts and screws in place but do not offer any sealing properties. Take a look at our thread sealants for this application.