No products found

Sorry for the inconvenience.

No products found with current parameters. Try to go back and adjust/reset the filters or select another product category below.

No products found.

G1/4'' Flat Seal Copper for Pressure Gauge
ML-SF-CU14
Tameson
$1.15 incl VAT
G1/4'' Flat Seal Copper for...
G1/4'' Flat Seal Copper for...
1 / 1

G1/4'' Flat Seal Copper for Pressure Gauge

ML-SF-CU14
Tameson

This copper sealing ring is used between a pressure gauge and mating surface to prevent leakage. Designed for G 1/4 inch male connection point located below or in the rear of the pressure gauge. Seal has an internal diameter of 5.2 mm and an outer diameter of 9.5 mm. It is a flat seal. Profile seal is recommended as it can rotate the gauge.

View all
$1.15 incl VAT info info
+3 days

Shipping to:

Estimate based on cart value including this product quantity.
UPS Express saver
Free from $377.00
28 Oct - 29 Oct
$25.21 incl VAT $25.21 excl VAT

Order before 16h CEST (mo-fr), same day shipment

2 year warranty, Returns 30 days


Customers rate us: 9.62 / 10 123 reviews
Customers rate us:

Description

This copper sealing ring is typically used as a mechanical seal between a pressure gauge and mating surface to prevent leakage. They are often times considered gaskets. It is meant for connection sizes of G 1/4 inch. It has an internal diameter of 5.2 mm, outer diameter of 9.5 mm, and a height of 1,5 mm. It is a flat seal, meaning the pressure gauge cannot be rotated for correct orientation of the readout (profile seal is recommended as it can rotate the gauge).

Pros:

  • Allows for a proper seal between the pressure gauge and mounting surface.

Cons:

  • Can only be used once and when uninstalled it requires a new seal to be used to ensure proper sealage.
  • Generally not able to rotate pressure gauge for correct orientation of readout.

ML-S series

The ML-S seal series it ideally used as a mechanical seal (gasket) between a pressure gauge and the mating surface to prevent any leakage. Designed for G 1/4, G 3/8, or G 1/2 inch connections. Profile seals (internally or externally centered) or flat seals are available. Profile seals are recommended to allow for extra rotation for proper gauge readout orientation.

Downloads

Manual ML-SF (EN) pdf Download save_alt

Specification

  • Port
    1/4 inch
  • Housing
    Koper
  • Series
    MW-SF