pastes

The structure of pastes is similar to that of greases. However, the share of solid lubricants is significantly higher. This ensures reliable lubrication, separation and corrosion protection, also when used under extreme temperature and... Read more Read more

Product Brand Net weight (g) Min temperature (°C) Four-ball test rig (welding load) (N) Max temperature (°C) Press-fit test Volume (ml)
White Allround Paste...
€42.10 (€34.79 excl vat)
+2 days
OKS 250 -40 3600 200 0.1 -
Heat Sink Paste 500g OKS 1103
€80.10 (€66.20 excl vat)
+2 days
OKS 500 -40 - 180 - -
White Allround Paste...
€119.49 (€98.75 excl vat)
+2 days
OKS 1000 -40 3600 200 0.1 -
High-Temperature Paste MoS2...
€160.23 (€132.42 excl vat)
+2 days
OKS 1000 -35 3200 180 0.11 -
White High-temperature...
+2 days
OKS 250 -30 - 160 0.12 -
Chuck Jaw Paste 1kg OKS 265
€77.38 (€63.95 excl vat)
+2 days
OKS 1000 -45 4200 110 - -
Aluminum Paste Anti-seize...
€44.79 (€37.02 excl vat)
+2 days
OKS 250 -30 - 1100 - -
Antiseize Copper Paste 250g...
€50.52 (€41.75 excl vat)
+2 days
OKS 250 -30 2800 200 0.12 -
White Grease Paste 250g OKS...
€39.37 (€32.54 excl vat)
+2 days
OKS 250 -25 5000 125 0.14 -
White High-temperature...
+2 days
OKS 1000 -30 - 160 0.12 -
Ceramic Paste for Heavily...
€24.71 (€20.42 excl vat)
+2 days
OKS - -30 3400 100 - 150
Insulating Paste 500g OKS 1105
€148.02 (€122.33 excl vat)
+2 days
OKS 500 -40 - 200 - -
Assembly Paste MoS2 40ml...
€18.32 (€15.14 excl vat)
+2 days
OKS - -35 2400 450 0.09 40
Assembly Paste MoS2 250g...
€51.58 (€42.63 excl vat)
+2 days
OKS 250 -35 2400 450 0.09 -
Aluminum Paste Anti-seize...
€124.92 (€103.24 excl vat)
+2 days
OKS 1000 -30 - 1100 - -
pastes

pastes

The structure of pastes is similar to that of greases. However, the share of solid lubricants is significantly higher. This ensures reliable lubrication, separation and corrosion protection, also when used under extreme temperature and pressure conditions and with aggressive media. Besides screwed connections, pastes are also used for pressing in pins and bolts and for gear wheels.

Characteristics of pastes:

  • Press-fit test - Determines the lubricating effect of pastes at very high pressures and low slide speeds (relevant for assembly pastes).
  • Thread friction coefficient according to DIN EN ISO 16047 - Specifies a measurement of friction when screws and nuts are tightened (relevant for screw pastes).
  • Breakaway torque according to DIN 267-27 - Ratio of the required breakaway torque when loosening the screwed connection to the tightening torque.
  • Operating temperature - Temperature range of the optimal performance.