pastes

The structure of pastes is similar to that of greases. However, the share of solid lubricants is significantly higher. This ensures reliable lubrication, separation and corrosion protection, also when used under extreme temperature and... Read more Read more

Product Brand Min temperature (°C) Max temperature (°C) Net weight (g) Press-fit test Four-ball test rig (welding load) (N) Volume (ml)
High-Temperature Paste MoS2...
+2 days
OKS -35 180 1000 0.11 3200 -
Ceramic Paste for Heavily...
+2 days
OKS -30 100 - - 3400 250
Aluminum Paste Anti-seize...
+2 days
OKS -30 1100 250 - - -
Heat Sink Paste 40ml OKS 1103
+2 days
OKS -40 180 - - - 40
Heat Sink Paste 500g OKS 1103
+2 days
OKS -40 180 500 - - -
Chuck Jaw Paste 1kg OKS 265
+2 days
OKS -45 110 1000 - 4200 -
White Allround Paste...
+2 days
OKS -40 200 1000 0.1 3600 -
White High-temperature...
+2 days
OKS -30 160 1000 0.12 - -
Chuck Jaw Paste 400ml OKS 265
+2 days
OKS -45 110 - - 4200 400
Ceramic Paste for Heavily...
+2 days
OKS -30 100 - - 3400 150
Antiseize Copper Paste 75ml...
+2 days
OKS -30 200 - 0.12 2800 75
White Allround Paste...
+2 days
OKS -40 200 - 0.1 3600 80000
Insulating Paste 500g OKS 1105
+2 days
OKS -40 200 500 - - -
Antiseize Copper Paste...
+2 days
OKS -30 200 - 0.12 2800 400
Antiseize Copper Paste 8ml...
+2 days
OKS -30 200 - 0.12 2800 8
pastes

pastes

The structure of pastes is similar to that of greases. However, the share of solid lubricants is significantly higher. This ensures reliable lubrication, separation and corrosion protection, also when used under extreme temperature and pressure conditions and with aggressive media. Besides screwed connections, pastes are also used for pressing in pins and bolts and for gear wheels.

Characteristics of pastes:

  • Press-fit test - Determines the lubricating effect of pastes at very high pressures and low slide speeds (relevant for assembly pastes).
  • Thread friction coefficient according to DIN EN ISO 16047 - Specifies a measurement of friction when screws and nuts are tightened (relevant for screw pastes).
  • Breakaway torque according to DIN 267-27 - Ratio of the required breakaway torque when loosening the screwed connection to the tightening torque.
  • Operating temperature - Temperature range of the optimal performance.