pastes

The structure of pastes is similar to that of greases. However, the share of solid lubricants is significantly higher. This ensures reliable lubrication, separation and corrosion protection, also when used under extreme temperature and... Read more Read more

Product Brand Min temperature (°C) Max temperature (°C) Net weight (g) Four-ball test rig (welding load) (N) Press-fit test Volume (ml)
White Allround Paste...
+2 days
OKS -40 200 250 3600 0.1 -
Heat Sink Paste 500g OKS 1103
+2 days
OKS -40 180 500 - - -
White Allround Paste...
+2 days
OKS -40 200 1000 3600 0.1 -
Chuck Jaw Paste 1kg OKS 265
+2 days
OKS -45 110 1000 4200 - -
High-Temperature Paste MoS2...
+2 days
OKS -35 180 1000 3200 0.11 -
White High-temperature...
+2 days
OKS -30 160 250 - 0.12 -
Aluminum Paste Anti-seize...
+2 days
OKS -30 1100 250 - - -
Rapid Paste MoS2  250g OKS 220
+2 days
OKS -35 450 250 4200 0.05 -
Antiseize Copper Paste 250g...
+2 days
OKS -30 200 250 2800 0.12 -
White Assembly Paste 1kg...
+2 days
OKS -25 150 1000 2600 0.09 -
White Grease Paste 250g OKS...
+2 days
OKS -25 125 250 5000 0.14 -
White High-temperature...
+2 days
OKS -30 160 1000 - 0.12 -
Ceramic Paste for Heavily...
+2 days
OKS -30 100 - 3400 - 150
Insulating Paste 500g OKS 1105
+2 days
OKS -40 200 500 - - -
Assembly Paste MoS2 40ml...
+2 days
OKS -35 450 - 2400 0.09 40
pastes

pastes

The structure of pastes is similar to that of greases. However, the share of solid lubricants is significantly higher. This ensures reliable lubrication, separation and corrosion protection, also when used under extreme temperature and pressure conditions and with aggressive media. Besides screwed connections, pastes are also used for pressing in pins and bolts and for gear wheels.

Characteristics of pastes:

  • Press-fit test - Determines the lubricating effect of pastes at very high pressures and low slide speeds (relevant for assembly pastes).
  • Thread friction coefficient according to DIN EN ISO 16047 - Specifies a measurement of friction when screws and nuts are tightened (relevant for screw pastes).
  • Breakaway torque according to DIN 267-27 - Ratio of the required breakaway torque when loosening the screwed connection to the tightening torque.
  • Operating temperature - Temperature range of the optimal performance.