0 to 600bar WIKA Pressure Transducer G1/2'' 0.25%

0 to 600bar WIKA Pressure Transducer G1/2'' 0.25%
Image may vary slightly
See specifications for accurate information.
Reference: 14071155
Brand: WIKA

This WIKA pressure transducer converts pressure from 0 to 600 bar (0 to 8702 psi) into a 4 - 20 mA output signal. The non-linearity is 0.25% across the span. The supply voltage is 8 - 35 V DC. The pressure transducer is made from stainless steel and has a copper sealings. The temperature range is from -30 to 100°C (-22 to 212°F).

View all
Regular price
$582.85
excl VAT

In stock +2 days On request On request
0 are currently in your cart. For orders exceeding 0, expect an increased lead time of 2 days. Up to 1 items available for online order. For higher quantities, please contact us on support@tameson.com to request the lead time. The item is not available for online order, please contact us on support@tameson.com to request the lead time.


Shipping to United States: Free
Free for orders > $390.00
Expected delivery in 4 - 5 business days

Description
Specifications
Downloads
Related products

This WIKA pressure transducer converts pressure into an electric output signal. The measuring pressure range is from 0 to 600 bar (from 0 to 8702 psi) with a non-linearity of 0.25% of the span. Non-linearity is defined as the greatest deviation from a straight reference line (BFSL - Best Fit Straight Line). The overpressure limit is 1200 bar (17405 psi). The pressure transducer requires a 8 - 35 V DC power supply and generates an output signal of 4 - 20 mA current with a 2-wire configuration. The same wire is used to send a signal to the receiver and to power the transmitter (DIN-A connector). The housing and wetted parts are made from stainless steel and the seals are made from a copper. The temperature range is from -30 to 100°C (from -22 to 212°F). Consult our chemical resistance chart to verify the compatibility of the sensor materials with your media. The connection port has a size of G 1/2 inch with male threads and has a centring pin for a profiled seal. The pressure transducer has an IP65 rating.

Pros:

  • Good accuracy and robust design
  • Housing and wetted parts are made from stainless steel
  • High overpressure protection (up to 2 times)
  • Delivered including DIN-A connector

S-20 series

Tameson offers a wide range of pressure transducers with an analog or digital electric output. The measuring pressure range for these pressure transducers is from -1 to 1000 bar (from -14 to 14000 psi) with maximum overpressures up to 1500 bar (21750 psi). They have non-linearity between 0.2 to 0.5%. The output signal can be either 4 - 20 mA current or 0 - 10 V DC. These pressure transducers always require a power supply (typically 8 - 35 V DC) to function and the electrical connection is a DIN-A connector (EN 175301-803). Their housing and wetted parts are made from stainless steel and they are available with different seals. The pressure transducers can be used with different media (hydraulic oil, compressed air, gases etc.) and they can work with different temperatures from -40 to 125°C (from -40 to 257°F). Pressure transducers are equipped with male threads from 1/4 to 1 inch.