end cap and plug fittings
Subcategories
| Product | Brand | Thread | Material | Fitting features | Connection type | Max pressure at 20 °C (bar) | Material connection 1 | With drain | Seal material | Surface protection connection 1 | Wrench width (mm) | Material quality connection 1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/2'' Brass Closing plug with Inner Hex without collar 16...FL1-M-B-012R-I-W
In stock
|
Tameson | 1/2 inch | Brass | Capped | Outer thread conical BSPT-R | 16 | Brass | No | - | - | - | - |
G 1/4'' Brass Closing plug with Inner Hex without collar...FL1-M-B-014G-I-W
In stock
|
Tameson | 1/4 inch | Brass | Capped | Outer thread cylindrical... | 16 | Brass | No | - | - | - | - |
G 1/2'' Nickel plated Brass Closing plug with Inner Hex...FL1-M-BNN-012G-I
In stock
|
Tameson | 1/2 inch | Brass | Capped, With gasket | Outer thread cylindrical... | 16 | Brass | No | NBR (nitrile rubber) | Nickel-plated | - | - |
1/4'' NPT Male Zinc plated Steel Closing plug with Outer...FL1-M-EZ-014N-E
In stock
|
Tameson | 1/4 inch | Steel | Capped | Outer thread conical (NPT) | 275 | Steel | No | - | Galvanic/electrolytic zinc... | - | - |
1/8'' NPT Male Zinc plated Steel Closing plug with Outer...FL1-M-EZ-018N-E
In stock
|
Tameson | 1/8 inch | Steel | Capped | Outer thread conical (NPT) | 345 | Steel | No | - | Galvanic/electrolytic zinc... | - | - |
G 1/2'' Nickel plated Brass Closing plug with Outer Hex...FL1-M-BN-012G-E
In stock
|
Tameson | 1/2 inch | Brass | Capped | Outer thread cylindrical... | 16 | Brass | No | - | Nickel-plated | - | - |
G 3/8'' Nickel plated Brass Closing plug with Inner Hex...FL1-M-BNN-038G-I
In stock
|
Tameson | 3/8 inch | Brass | Capped, With gasket | Outer thread cylindrical... | 16 | Brass | No | NBR (nitrile rubber) | Nickel-plated | - | - |
M5 Brass Closing plug with Outer Hex 16 BarFL1-M-B-M5-E
In stock
|
Tameson | M5 | Brass | Capped | Outer thread metric | 16 | Brass | No | - | - | 8 | - |
G 1/8'' Brass Closing plug with Outer Hex 16 BarFL1-M-B-018G-E
+2 days
|
Tameson | 1/8 inch | Brass | Capped | Outer thread cylindrical... | 16 | Brass | No | - | - | 14 | - |
1/4'' Brass Closing plug with Inner Hex without collar 16...FL1-M-B-014R-I-W
+3 days
|
Tameson | 1/4 inch | Brass | Capped | Outer thread conical BSPT-R | 16 | Brass | No | - | - | - | - |
1/4'' Stainless steel Closing plug with Inner Hex without...FL1-M-S-014R-I-W
+3 days
|
Tameson | 1/4 inch | Stainless steel | Capped | Outer thread conical BSPT-R | 40 | Stainless steel | No | - | - | - | Stainless steel 316 (1.4401) |
G 1/4'' Stainless steel Closing plug with Outer Hex 40 BarFL1-M-S-014G-E
+2 days
|
Tameson | 1/4 inch | Stainless steel | Capped | Outer thread cylindrical... | 40 | Stainless steel | No | - | - | - | Stainless steel 316 (1.4401) |
G 1/4'' Stainless steel Closing plug with Inner Hex...FL1-M-ST-014G-I-W
+3 days
|
Tameson | 1/4 inch | Stainless steel | Capped | Outer thread cylindrical... | 40 | Stainless steel | No | - | - | - | Stainless steel 316 Ti... |
G 1/8'' Nickel plated Brass Closing plug with Inner Hex...FL1-M-BNN-018G-I
+3 days
|
Tameson | 1/8 inch | Brass | Capped, With gasket | Outer thread cylindrical... | 16 | Brass | No | NBR (nitrile rubber) | Nickel-plated | - | - |
G 1/4'' Nickel plated Brass Closing plug with Inner Hex...FL1-M-BNN-014G-I
+2 days
|
Tameson | 1/4 inch | Brass | Capped, With gasket | Outer thread cylindrical... | 16 | Brass | No | NBR (nitrile rubber) | Nickel-plated | - | - |
end cap and plug fittings
View Tameson's range of end cap and plug fittings. End caps, also called end plugs, only have 1 port. Therefore, they are used to close off ports for permanent setups or for maintenance, inspection, or repairs. A practical example of using a plug is to close off unused ports in a manifold block. It is important to know your media to properly select the right material. Common materials are brass, stainless steel, nickel-plated brass, and cast iron. They can have either male or female threads to attach to the system. They can have either a hex nut or hex socket design.
