This inner hex straight fitting of the premium brand Pisco has two connection ports to connect a hose to a pipe or pneumatic component. Connection 1 is a 4 mm push-in fitting. Connection 2 is a R1/8" male threaded fitting with a Teflon coating. Max pressure of 10 bar, suitable for vacuums, and a temperature range of 0 – 60 °C.
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
This inner hex straight fitting has two connection ports to connect a hose to a pipe or pneumatic component. Connection 1 is a 4 mm push-in fitting. Connection 2 is a R1/8" male threaded fitting with a Teflon coating. It is a straight connection from input to output. It is an unequal fitting, so one of the ports is smaller than the other. The fitting has a brass housing, polyoxymethylene (POM) connection material, and a NBR seal. It is suitable for a max pressure of 10 bar and a temperature range of 0 – 60 °C. It is suitable for vacuum applications. The push-in fitting is easily installed by pushing the pneumatic tube against the release ring-end of the fitting until it stops, and the internal claw secures it into place. It is easily uninstalled by pushing the release ring inward towards the fitting and pulling the tubing back. It is suitable for Nylon, Polyethylene (PE), or Polyurethane (PU) tubing material.
The Pisco Standard Series covers our push-in fittings. Pisco is a premium brand that is known for its excellent value for money. Push-in fittings are easily installed and uninstalled saving time and money while maintaining a leak free seal. They can have between one to six connection ports and are made out of brass and plastic. Fittings with one connection port are used to stop the flow of air, like a plug or cap. Fittings with two connection ports are used to connect two hoses together, or to connect a pneumatic hose to a pipe and/or component with a threaded connection on the second port. A fitting with three or more connection ports can have multiple uses with multiple inlets or outlets. Different design options are available, for example straight, elbowed at an angle, or different size diameter ports (unequal) depending on the applications.