Sorry for the inconvenience.
No products found with current parameters. Try to reset filters.
Connector with LED (DIN - C)
DIN - C connector (IP65) with an LED indicator. Useful tool to see if the coil is energised. Suitable for solenoid valves with a DIN - C connector for voltages from 12V up to 380V. Please note: when DC is used, the brown pole should be connected to the positive terminal.
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
DIN-C connector (DIN43650C) for solenoid valves. The LED indication is a handy tool to see whether the valve is activated. Suitable for 12-380V AC/DC. When DC is used please make sure that the brown wire is connected to the positive pole, otherwise the LED does not light up.
|Pin distance||DIN - C mm|
|Max. cable size||≤3x1.5mm2|
- Connect the terminals (1) and (2) to the connector. With AC, polarity is not important. Always connect to the ground, don't use the piping as earthing.
- Mount the connector and make sure no moisture can enter between coil and connector.
- Use a round cable. Make sure that drops cannot slide along the cable into the connector.
ConnectorDIN - C