{"title":"Bürkert SE30 basic paddle wheel flow meter electronics (requires S030 fitting)","description":"\u003cp\u003eThe Bürkert SE30 is the basic transmitter for an inline paddle wheel flow meter. It fits onto an S030 fitting, picks up the spinning paddle wheel, and sends a pulse signal whose frequency tracks the flow rate. It has no display and no switch output, so it suits a setup where another device, such as a PLC or counter, takes the pulse and does the rest. Combine it with an S030 fitting for a complete flow meter.\u003c\/p\u003e\u003ch3\u003eWhen to choose the SE30\u003c\/h3\u003e\u003cp\u003ePick the SE30 when only a flow pulse is needed and the reading is shown or totaled elsewhere. For an on-device display, a switch contact, or a 4 to 20 mA signal, step up to the SE32 or SE35. The SE30 runs on a low-voltage DC supply and connects through a DIN form A plug.\u003c\/p\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eWhat does the SE30 connect to?\u003c\/h4\u003e\u003cp\u003eThe pulse output feeds a counter, a PLC input, or a Bürkert controller, which turns the frequency into a flow rate and a running total. Without one of those there is no local reading, because the SE30 has no display of its own.\u003c\/p\u003e\u003ch4\u003eWhich fitting does the SE30 mount on?\u003c\/h4\u003e\u003cp\u003eAn S030 inline fitting, which holds the paddle wheel the SE30 picks up. The same SE30 also fits the S077 oval-gear fitting, so it can be reused if the line later switches to oval-gear measurement. Order the SE30 with whichever fitting suits the pipe and liquid.\u003c\/p\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/1787\/6152\/collections\/b932855b1bd0-se30_010_b_8030montage.png?v=1782956928","url":"https:\/\/tameson.com\/collections\/burkert-se30-paddle-wheel-flow-meters-327039.oembed","provider":"Tameson.com","version":"1.0","type":"link"}