Sorry for the inconvenience.
No products found with current parameters. Try to reset filters.
DN80 Wafer Pneumatic Butterfly Valve GG25-GGG40 polyamide-coated-EPDM Double Acting - BFLW
This pneumatically actuated butterfly valve with a wafer type style connection has a 80 mm orifice. The butterfly valve has a cast iron housing, cast iron disc and a EPDM seal. Suitable for liquids and gases from -10°C to 110°C and a maximum pressure 16 bar. The double acting actuator has an anodized aluminum housing and either an acetal resin cover. Connect an air hose utilizing the G 1/8" connection point or mount a 1/4" Namur solenoid valve directly on the actuator. ATEX (II 2G Ex d C) certified.
Order before 16:00 h, same day shipment
2 year warranty, Returns 14 days
This pneumatically controlled butterfly valve allows for an increase in automation to your system compared to a manually controlled valve. The butterfly valve has a 80 mm diameter and is suitable for liquids and gases from -10 to 110°C. The pneumatic actuator is capable of creating 49.6 Nm of torque at 8 bar, but it has a control pressure window of 6 – 10 bar. The butterfly valve has a wafer type style connection to connect it to the piping/hosing carrying the media. The actuator is double acting with a reliable aluminium rack-and-pinion rotational operation. The actuator has an anodized aluminum housing and either an acetal resin cover, while the butterfly valve has a cast iron housing, cast iron disc and a EPDM seal. The maximum media pressure is 16 bar. Namur VDI/VDE 3845 connection points are already on the actuator to mount a 1/4" Namur solenoid valve directly onto the actuator. Or connect an air hose utilizing the G 1/8". Also, a position control or limit switch box can be mounted on the top of the actuator according to VDI/VDE 3845. The actuator is mounted on the butterfly valve via the ISO 5211 F05 flange (11 mm). The assembly is ATEX certified (II 2G Ex d C) and may therefore be used in potentially explosive environments.
- Ability to directly mount a Namur solenoid valve to reduce fittings and tubing.
- Mechanical indicator on top shows the valve position.
- ATEX (II 2G Ex d C) certified for explosive environments.
- Lower investment cost than an electric version.
- Fast opening/closing
- Double acting allows for greater control than single acting actuators.
- Can be equipped with a limit switch box.
- Double acting utilizes more compressed air than single acting actuators.
- It requires a compressed air system and a solenoid valve to control the air supply.
- Energy consumption is higher than compared with electric actuators, but initial investment is lower.
BFL - PAL series
The BFL series butterfly valves are a great cost effective solution for on/off operations as well as modulating the flow. Manually operated by either a squeeze lever with a locking detent or hand gear wheel, they are easily used. Suitable for pressures from 4 - 16 bar depending on the diameter size (25 - 300mm), media, and material combination. Remove the squeeze lever or handwheel to create an ISO 5211 flange (size F05 to F12). It has a small constructive length relative to the diameter and can be installed by a lug type flange or wafer type flange. There is also a wide range of housing, disc, and seal material options allowing these butterfly valves. They can be used for both liquids and gases in applications with a large temperature range. Some models can also be used for drinking water (DVGW approval).
The PAL quarter turn pneumatic actuators allow you to control ball or butterfly valves with compressed air. They offer a reliable and robust solution to automate larger valves at a lower investment cost than electric actuators. They are mounted onto quarter turn valves with an ISO 5211 top flange (from F03 up to F12). With 8 different body sizes, they generate a torque range from 9.92 Nm to 901.8 Nm at 8 bar. Designed with a reliable aluminum rack and pinion rotational operation and designed to be either single acting (spring open or spring close) or double acting for increased control. These actuators are durable with an anodized aluminum housing and either an acetal resin (sizes 1-6) or aluminum (sizes 12-130) cover. The standard temperature range is -20°C to 80°C with an NBR seal, but an optional FKM seal is available for an increased maximum temperature of 120°C (sizes 1-6) or 150°C (sizes 12-130). All valves have a 1/4" Namur interface according to VDI/VDE 3845 with either G 1/8" or G 1/4" threads. The actuator is suitable for explosive environments thanks to the ATEX (II 2G Ex d C) certification.
Butterfly valve: BFLW-80-16-AAA
Note: Delivered in separate parts. Includes required mounting materials.
HousingCast iron (GG25)