Sorry for the inconvenience.
No products found with current parameters. Try to reset filters.
Description
2-Way ball valve of pvc from Tameson with 32mm solvent sockets on both ends. Thanks to the true union design, the valve can be easily installed or removed. The valve has a full bore (25 mm). The valve has a red handle for manual control.
Technical Specifications
Parameter | Value |
---|---|
Series | BMP |
Function | 2-way |
Ports | 32mm solvent sockets |
Housing | PVC |
Ball | PVC |
Seals | PE (seal rings), EPDM (O-rings) |
Nominal Diameter | 25 mm (full bore) |
Kv value | 60 m3/h |
Operation | PVC Lever (red) |
Max pressure | 16 bar |
Temperature | -10°C .. 60°C |
Installation
The valve is on both sides equipped with solvent sockets (32mm). A pipe with an outer diameter of 32mm can be inserted into the socket with PVC glue. This is a double union ball valve (or true union). This means that the valve can easily be removed from the piping for inspection or replacement.Operation
This ball valve can be manually operated by a lever. By rotating 90 degrees, the valve is open or closed. If the lever is perpendicular to the pipe, the valve is closed. This valve is not suitable for electrical or pneumatical control. For this purpose, valves with ISO-Top flange (ISO 5211) are recommended.
Application
This ball valve is part of the BMP series. The housing of the valve is made of pvc, the ball is made of pvc, de seat rings are made of PE and the O-rings are made of EPDM. The valve is suitable for various media and is often used in applications such as irrigation, swimming pools, water supply and drainage. The valve can be used up to a max pressure of 16 bar and a temperature between -10 and 60 °C.
Downloads
Specification
-
Port32mm
-
SealEPDM
-
HousingPVC
-
Function2 way
-
Min pres0
-
Max pres16
-
Kv60
-
Orifice25
-
Max temp60
-
SeriesBMP