1/4 Inch Solenoid Water Valve

View Tameson’s selection of ¼ inch solenoid water valves. These solenoid water valves have ¼ inch BSPP threads on the input and output. The valves in this category have a brass housing, an EPDM ... Read more

1/4 Inch Solenoid Water Valve

1/4 Inch Solenoid Water Valve

View Tameson’s selection of ¼ inch solenoid water valves. These solenoid water valves have ¼ inch BSPP threads on the input and output. The valves in this category have a brass housing, an EPDM seal and are normally closed (NC). These materials are a good and reliable solution for water applications.

A solenoid valve is quick acting compared to other valve types. The solenoid valve is electrically controlled and normally closed (NC), meaning that when the valve is supplied the proper voltage it will open. The valve will close and block the water flow if no voltage is applied.

These valves are 2/2-way, meaning they have 1 inlet port of ¼ inch female threads and 1 outlet port of ¼ inch female threads. The main product specification considerations are discussed below to make an educated selection process.

Additional ¼ inch Solenoid Water Valve Selection Criteria

The considerations for operating type are:

  1. Direct Operated: Doesn’t require a pressure differential to function properly.
  2. Semi-Direct Operated: A pressure differential isn’t required, but assists in the operation.

Note: Proper valve orientation of inlet and outlet is important for proper function. The correct orientation is denoted with an arrow on the valve housing.

The voltage of the valve is dependent on what is available for the application. Typical battery operated applications will either be 12 or 24V DC, while other industrial applications will be 120, 230, or 380V AC. Available options are:

  • 12V DC
  • 24V AC
  • 24V DC
  • 120V AC
  • 230V AC
  • 380V AC

Note: A valve rated at 230VAC will work with an input voltage of 220VAC or 240VAC.

All products shown have a brass housing and an EPDM seal material. Brass as a housing material is ideal as it is resistant to water (won’t rust) and is durable. EPDM as a seal material is ideal as it is suitable for water, good resistance to weather influences, and suitable up to a maximum temperature of 120 °C or 130 °C.

Are you looking for another solenoid valve type? Please take a look at our general solenoid valve category.