There are 1498 products
Show 1498 products

Max pressure (bar) info

Max temperature (°C)

Manual override

Kv value (m3/h) info

Degree of protection (IP)

valves for swimming pools

Valves for use in swimming pools often have a stainless steel or PVC body, due to the good corrosion resistance of these materials. The stainless steel grades 304 or 316 are commonly used, of which 316 has the best properties. Under certain... Read more Read more

There are 1498 products
Show 1498 products
Product Brand Connection size Voltage Material Seal material Material quality Function Operation Electrical connection Nominal power (VA) Max pressure (bar) Connection type Max temperature (°C) Max. ambient temp. (°C) Min pressure difference (bar) Degree of protection (IP) Min temperature (°C) Coil type Kv value (m3/h) Valve bore (mm) Model Duty cycle Max pressure difference at 20 °C (bar) Housing construction Full bore Article compression class Ball seal With drain possibility (connection) With drain Medically clean Outer pipe diameter connection 1 (mm) Outer pipe diameter connection 2 (mm) Features Control signal Width (mm) Manual override Position feedback Operating time (s) Torque (Nm) Max. electric power input (VA) Spindle seal material Ambient temperature (°C) Height (mm) Frequency Adjustable operating range With end contacts Material ball seal Transmission
Solenoid Valve ST-SA 1/2''...
In stock
JP Fluid Control 1/2 inch 24 V DC Stainless steel EPDM Stainless steel 316 (1.4401) Normally closed Semi-direct DIN-A 13 10 Inner thread cylindrical... 130 50 0 IP65 -30 CS1 1.02 8 Straight 100% - - - - - - - - - - - - - - - - - - - - - - - - - -
Solenoid Valve ST-DA 1/4''...
In stock
JP Fluid Control 1/4 inch 24 V DC Stainless steel FKM (FPM) Stainless steel 316 (1.4401) Normally closed Direct DIN-A 13 13 Inner thread cylindrical... 120 50 0 IP65 -10 CS1 0.2 3 Straight 100% - - - - - - - - - - - - - - - - - - - - - - - - - -
BMPM - 2-Way PVC Ball Valve...
In stock
Tameson 32 mm - Plastic EPDM Polyvinyl chloride (PVC) - Handle - - - Glued sleeve 60 - - - -10 - 60 25 Straight - 16 3-part Yes PN 16 EPDM No No No 32 32 - - - - - - - - - - - - - - - -
Solenoid Valve ST-SA 1/2''...
In stock
JP Fluid Control 1/2 inch 230 V AC Stainless steel EPDM Stainless steel 316 (1.4401) Normally closed Semi-direct DIN-A 17 16 Inner thread cylindrical... 130 50 0 IP65 -30 CS1 1.02 8 Straight 100% - - - - - - - - - - - - - - - - - - - - - - - - - -
BMPM - 2-Way PVC Ball Valve...
In stock
Tameson 50 mm - Plastic EPDM Polyvinyl chloride (PVC) - Handle - - - Glued sleeve 60 - - - -10 - 170 40 Straight - 16 3-part Yes PN 16 EPDM No No No 50 50 - - - - - - - - - - - - - - - -
BMPM - 2-Way PVC Ball Valve...
In stock
Tameson 40 mm - Plastic EPDM Polyvinyl chloride (PVC) - Handle - - - Glued sleeve 60 - - - -10 - 100 32 Straight - 16 3-part Yes PN 16 EPDM No No No 40 40 - - - - - - - - - - - - - - - -
Solenoid Valve ST-DA 1/4''...
In stock
JP Fluid Control 1/4 inch 12 V DC Stainless steel FKM (FPM) Stainless steel 316 (1.4401) Normally closed Direct DIN-A 13 13 Inner thread cylindrical... 120 50 0 IP65 -10 CS1 0.2 3 Straight 100% - - - - - - - - - - - - - - - - - - - - - - - - - -
Solenoid Valve HP-DA 1/4''...
In stock
JP Fluid Control 1/4 inch 24 V DC Stainless steel Teflon (PTFE) Stainless steel 316 (1.4401) Normally closed Direct DIN-A 18 75 Inner thread cylindrical... 130 50 0 IP65 -30 CS3 0.03 1 Straight 100% - - - - - - - - - - High pressure - - - - - - - - - - - - - - -
Solenoid Valve ST-DA 1/4''...
In stock
JP Fluid Control 1/4 inch 24 V DC Stainless steel EPDM Stainless steel 316 (1.4401) Normally closed Direct DIN-A 13 13 Inner thread cylindrical... 130 50 0 IP65 -30 CS1 0.2 3 Straight 100% - - - - - - - - - - - - - - - - - - - - - - - - - -
Solenoid Valve ST-DA 1/4''...
In stock
JP Fluid Control 1/4 inch 230 V AC Stainless steel FKM (FPM) Stainless steel 316 (1.4401) Normally closed Direct DIN-A 17 13 Inner thread cylindrical... 120 50 0 IP65 -10 CS1 0.2 3 Straight 100% - - - - - - - - - - - - - - - - - - - - - - - - - -
50mm 230V AC VDL 2-way PVC...
In stock
Tameson 50 mm 230 V AC Plastic - Polyvinyl chloride (PVC) - - - 23 16 Glued sleeve 60 - - IP67 0 - 170 40 - S2 - - - - - - - - - - - Three-point (open-close) 102 Yes Open & close limit switch 4 20 46 EPDM 50 °C to 50 °C 272.75 50/60 Hz Yes Yes Teflon (PTFE) With cogwheels
Solenoid Valve ST-IA 3/4''...
In stock
JP Fluid Control 3/4 inch 24 V DC Stainless steel EPDM Stainless steel 316 (1.4401) Normally closed Indirect DIN-A 13 16 Inner thread cylindrical... 130 50 0.5 IP65 -30 CS1 6.4 20 Straight 100% - - - - - - - - - - - - - - - - - - - - - - - - - -
BMPM - 2-Way PVC Ball Valve...
In stock
Tameson 63 mm - Plastic EPDM Polyvinyl chloride (PVC) - Handle - - - Glued sleeve 60 - - - -10 - 265 50 Straight - 16 3-part Yes PN 16 EPDM No No No 63 63 - - - - - - - - - - - - - - - -
Solenoid Valve ST-IA 1/2''...
In stock
JP Fluid Control 1/2 inch 24 V DC Stainless steel FKM (FPM) Stainless steel 316 (1.4401) Normally closed Indirect DIN-A 13 16 Inner thread cylindrical... 120 50 0.5 IP65 -10 CS1 3.84 13 Straight 100% - - - - - - - - - - - - - - - - - - - - - - - - - -
Solenoid Valve ST-IA 1/2''...
In stock
JP Fluid Control 1/2 inch 24 V DC Stainless steel EPDM Stainless steel 316 (1.4401) Normally closed Indirect DIN-A 13 16 Inner thread cylindrical... 130 50 0.5 IP65 -30 CS1 3.84 13 Straight 100% - - - - - - - - - - - - - - - - - - - - - - - - - -
valves for swimming pools

valves for swimming pools

Valves for use in swimming pools often have a stainless steel or PVC body, due to the good corrosion resistance of these materials. The stainless steel grades 304 or 316 are commonly used, of which 316 has the best properties. Under certain circumstances, they might be prone to pitting. PVC (PolyVinyl Chloride) has good mechanical properties and is corrosion resistant. Stainless steel is not suitable for components which come into contact with high concentrations of sodium hypochlorite, such as dosing valves. In this case, PVC is a better choice.