There are 1846 products
Show 1846 products

Max pressure (bar) info

Diameter inner (mm)

Max. differential pressure air/gases (bar)

Max. differential pressure water/liquids (bar)

Freq. input voltage (Hz)

Kv value (m3/h) info

Max temperature (°C)

drinking water products

On this page you will find an overview of valves that are suitable for drinking water. These valves require a European approval, such as WRAS, WRc, DVGW, KTW, ACS and KIWA.

The plastic solenoid valves from RPE are approved for drinking... Read more Read more

There are 1846 products
Show 1846 products
Product Brand Connection size Voltage Material Seal material Function Operation Max pressure (bar) Electrical connection Connection type Min pressure difference (bar) Approval Features Material quality Kv value (m3/h) Nominal power (VA) Max temperature (°C) Min temperature (°C) Model Coil type Max. ambient temp. (°C) Valve bore (mm) Duty cycle Degree of protection (IP) Peak power (VA) Supply-voltage (V) Type of accessory/spare part Freq. input voltage (Hz) Height (mm) Diameter inner (mm)
Solenoid Valve RPE 1/2''...
In stock
RPE 1/2 inch 12 V DC Plastic NBR (nitrile rubber) Normally closed Indirect 10 Faston 6.3 mm x 0.8 mm Inner thread cylindrical... 0.2 Drinking water Energy efficient (under 9 VA) Polyamide (PA) 0.96 6.3 60 0.0 Straight R-series 60 11 100% IPX0 - - - - - -
Solenoid Valve RPE 1/2''...
In stock
RPE 1/2 inch 230 V AC Plastic NBR (nitrile rubber) Normally closed Indirect 10 Faston 6.3 mm x 0.8 mm Inner thread cylindrical... 0.2 Drinking water Energy efficient (under 9 VA) Polyamide (PA) 0.96 8.4 60 0.0 Straight R-series 60 11 100% IPX0 - - - - - -
Solenoid Valve 100-HV Rain...
In stock
Rain Bird 1 inch 24 V AC Plastic NBR (nitrile rubber) Normally closed Indirect 10 - Inner thread cylindrical... 1 - Energy efficient (under 9 VA) Polypropylene (PP) - 2.4 43 0 Straight - 50 30 100% - 7 - - - - -
Digital Timer
$45.23
In stock
JP Fluid Control - - - - - - - DIN-A - - - - - - - - - - - - - - - - 24 V to 230 V Timer 50 Hz to 60 Hz 88 -
CS1 coil DIN-A connector...
In stock
JP Fluid Control - 230 V AC Epoxy - - - - DIN-A - - - - - - 17 - - - - - - 100 - - - Magnetic core - 37.4 14.7
Solenoid Valve RPE single...
In stock
RPE 3/4 inch, 10 mm 230 V AC Plastic NBR (nitrile rubber) Normally closed Indirect 10 Faston 6.3 mm x 0.8 mm Hose pillar, Outer thread... 0.2 Drinking water Energy efficient (under 9 VA) Polyamide (PA) 1.21 8.4 60 0.0 Straight R-series 60 10 100% IPX0 - - - - - -
CS4 coil DIN-B connector...
In stock
JP Fluid Control - 230 V AC Epoxy - - - - DIN-B - - - - - - 8 - - - - - - 100 - - - Magnetic core - 28 10.25
Solenoid Valve RPE 1/4''...
In stock
RPE 1/4 inch 12 V DC Plastic NBR (nitrile rubber) Normally closed Indirect 10 Faston 6.3 mm x 0.8 mm Inner thread cylindrical... 0.2 Drinking water Energy efficient (under 9 VA) Polyamide (PA) 0.95 6.3 60 0.0 Straight R-series 60 11 100% IPX0 - - - - - -
Solenoid Valve RPE 1/2''...
In stock
RPE 1/2 inch 24 V DC Plastic NBR (nitrile rubber) Normally closed Indirect 10 Faston 6.3 mm x 0.8 mm Inner thread cylindrical... 0.2 Drinking water Energy efficient (under 9 VA) Polyamide (PA) 0.96 6.3 60 0.0 Straight R-series 60 11 100% IPX0 - - - - - -
CS1 coil DIN-A connector...
In stock
JP Fluid Control - 24 V DC Epoxy - - - - DIN-A - - - - - - 13 - - - - - - 100 - - - Magnetic core - 37.4 14.7
Solenoid Valve 100-HVF Rain...
In stock
Rain Bird 1 inch 24 V AC Plastic NBR (nitrile rubber) Normally closed Indirect 10 - Inner thread cylindrical... 1 - Energy efficient (under 9 VA) Polypropylene (PP) - 2.4 43 0 Straight - 50 30 100% - 7 - - - - -
CS2 coil DIN-A connector...
In stock
JP Fluid Control - 230 V AC Epoxy - - - - DIN-A - - - - - - 33 - - - - - - 100 - - - Magnetic core - 37 16.3
Analog timer round
$33.05
In stock
JP Fluid Control - - - - - - - DIN-A - - - - - - - - - - - - - - - - 24 V to 230 V Timer 50 Hz to 60 Hz 82 -
Solenoid Valve DF-SA 1''...
In stock
JP Fluid Control 1 inch 230 V AC Plastic EPDM Normally closed Semi-direct 8 DIN-A Inner thread cylindrical... 0 - - Polyamide (PA) 10.24 33 80 -30 Straight CS2 50 25 100% IP65 - - - - - -
Solenoid Valve RPE 1/2''...
In stock
RPE 1/2 inch 24 V AC Plastic NBR (nitrile rubber) Normally closed Indirect 10 Faston 6.3 mm x 0.8 mm Inner thread cylindrical... 0.2 Drinking water Energy efficient (under 9 VA) Polyamide (PA) 0.96 7.2 60 0.0 Straight R-series 60 11 100% IPX0 - - - - - -
drinking water products

drinking water products

On this page you will find an overview of valves that are suitable for drinking water. These valves require a European approval, such as WRAS, WRc, DVGW, KTW, ACS and KIWA.

The plastic solenoid valves from RPE are approved for drinking water and sanitation facilities. Note that an indirect operated solenoid valve requires a pressure differential for proper operation. With a low input pressure (<0.5 bar), these valves are not suitable. In this case, a direct operated solenoid valve is a better choice.

There are different types of manual ball valves with drinking water approval. Some models have an anti-legionella and anti-frost design for added safety and protection.